quantity at left all prices are obo, and plus shipping, local delivery can be arranged. thanks for looking


1) 333882 heavy duty casting sbc head with steam holes and recent valve job perimiter bolt vavle covers
-- $40

1) 482624 light duty casting sbc head with steam holes and recent valve job perimeter bolt vavle covers
-- $30

1) 14014416 perimeter bolt valve cover sbc head has valves, no springs
-- $20

1) 3884520 perimeter bolt valve cover sbc head has valves, no springs
-- $20

2) 14102193 perimeter bolt valve cover sbc head has minor port work on one head, no valves
-- $50/pair

2) 14101081 center bolt valve cover sbc heads
-- $40/pair

4) 14102193 sbc heads for center bolt valve covers, 2 have very low mileage stock replacement valve springs
-- $40/pair

2) used stock s-10 front coil springs with heavy duty towing package and 4.3 auto - great condition
-- $20

2) used stock s-10 front spindles - great condition
-- $40

2) used stock s-10 front calipers
-- $10

1) stock th 350 trans pan with drain plug
-- scrap yard

1) sbc 2 piece rear main oil pan stock
-- scrap yard

1) set of partially ported tpi intake runners, and ported upper plenum
-- $40

1) qudrajet 4 barrel carb
70422j2 dj1
2728
stamped by the secondary shaft on the drivers side of carb
-- make offer

1) carter afb carb
42958 k6 -- stamped by pass front mounting bolt
0-1830 -- stamped on the pass side of the main body
-- make offer

1) set of rear air shocks from a 1993 s-10
-- $25

1) rear disc brake setup from a 2001 zr2 s-10 pick-up
-- $25

1) complete set of rancho lift/lower blocks, cast iron/steel, with driveshaft correction angles, with all hardware, used @ 3 months and decided the vehicle was too high (would not fit in the garage), cost 74.99 new at jegs
-- $50

6) sbc centerbolt valve covers
-- scrap yard

2) one rear main sbc timing covers
-- scrap yard

1) set of good stock 5.7 inch 350 rods
-- $50

1) one piece rear main seal 350 sbc crank
-- $30

1) holley 750 dp without choke, works great, off of a friends 750hp 396 sbf
-- $200

1) factory vortec 350 roller cam, lifters, link bars, and spider
-- $75

2) gm 3.42 gear set
-- $40 each

both are gear sets for gm 7.5/7.625 10 bolt rear diff.

1) eaton locker from a 2001 zr2 s-10 30 spline axle 8.5" 10 bolt 15000 miles
-- $150

1) th350 needs rebuilt 6 inch tailshaft
--$50

4) 1993 grand prix wheels, good for drag radials on a gtp/bonneville
-- scrap yard

1) Open 4 Barrel Carb 2 Inch Spacer - Brand New, Never Used!
-- $20

2) 1993 Z28 Rear Rotors And Caliper Brackets - No Calipers
-- $25

***added***
s-10 reece hitch p/n 06064 3500/300 max weight
$20
hi rpm flex fan 17" blue/silver
$10
hooker 3" collectors with grafoil gasket
$20

 

*****added*****

1) Open 4 Barrel Carb 2 Inch Spacer - Brand New, Never Used!
-- $20

2) 1993 Z28 Rear Rotors And Caliper Brackets - No Calipers
-- $25

 

updated prices and items. its gotta go soon

thanks
kevin

 

1) holley 750 dp without choke, works great, off of a friends 750hp 396 sbf
-- $200



Any pics? mzoomora@msn.com

 

took some tonight, they are on the way.

kevin

 

3.73 gears and zexel diff sold. everything else needs to go by next weekend. i will be semi-homeless for 3 weeks till i can get into the new house, and i dont have the storage.
thanks guys/gals
kevin

 

zexel posi, richmond gears, weiand intake, and general kinetics cam sold and shipped.

 

updated list. stuff is going to scrap yard.

 

That eaton locker... got pics? PM me...

Also.. are there gears already on them?

 

That eaton locker will it fit silverados?