This cam was spec'd out by pat-g for a LS2 , but it should work well for anyone with cathedral heads.


The specs are 222/230 112+2 .602/.609 LXL/LXL lobes .


For comparison, This cam is just slightly smaller then a V2 but bigger then a rob cam.
Lobe profiles are mild as well so its easy on the springs.

I ran it with a 3200 stall, I know allot of guys will ask if it can be run on a stock stall and to be honest I'm not sure.

Price is $300 shipped to your door.


Thanks

 

Damn good nitrous cam.

 

pm sent

 

Is it used?

That to me looks like a good NA rectangle port cam.

 

Ya it's been used for about 3-4k

I'm going much bigger now that my truck is not a daily anymore .

 

would you happen to have the actual cam card? or videos of it at idle etc

I'm thinking this would be pretty sick in my saab 97x DD. It also has a 3000 stall and an L96 square port Iron block 6.0.

 

I do have the cam card , ill snap a pic later .

I have a video aswell but keep in mind I adjusted the tune slightly to make it chop harder

 

SOLD