F/S Built 4l60e and Yank PT3800
#1
Thread Starter
Staging Lane
iTrader: (3)
Joined: Nov 2007
Posts: 64
Likes: 0
From: Baton Rouge, Louisiana
Gettin rid of the tbss so I'm goin back stock. I have a built 60e that I wanna trade for a stock 60e r 70e plus $1000 obo. Prefer locally pickup r I can deliver r meet. Will sell the tranny str8 up for $1600 or the tranny and Yank PT3800 for $2000obo. Just the stall for $550
TRANNY SOLD. Converter still available
Stock case
13 vane pump
sleeved input drum
High Energy Lo/Rev clutches
High Energy 3-4 Clutches
5 pinion GM planet
300M billet output shaft
Beast sun shell
29 element sprag
Transgo HD 2 shift kit
Sonnax 2-3 orifice
Sonnax HD 2-3 shift valve
Super hold billet 2nd servo
Super hold billet 4th servo
Welded reaction carrier modification
5 pinon front planet
New GM thrust bearings
New seals
30 miles since built when I bought it and ive put about 400miles on it.I would need a good workin tranny for part of the trade.
Also the stall was flushed 3500 miles ago and was flushed when the tranny was installed. The tranny and stall is still currently in the truck so u can c it shifts perfectly.
TRANNY SOLD. Converter still available
Stock case
13 vane pump
sleeved input drum
High Energy Lo/Rev clutches
High Energy 3-4 Clutches
5 pinion GM planet
300M billet output shaft
Beast sun shell
29 element sprag
Transgo HD 2 shift kit
Sonnax 2-3 orifice
Sonnax HD 2-3 shift valve
Super hold billet 2nd servo
Super hold billet 4th servo
Welded reaction carrier modification
5 pinon front planet
New GM thrust bearings
New seals
30 miles since built when I bought it and ive put about 400miles on it.I would need a good workin tranny for part of the trade.
Also the stall was flushed 3500 miles ago and was flushed when the tranny was installed. The tranny and stall is still currently in the truck so u can c it shifts perfectly.
Last edited by ticketmaster86; Dec 28, 2010 at 09:00 PM.
#2
ive driven the TBSS and behind the 418 this tranny does not miss a lick @ part throttle or WOT. if i woulnt have taken on the 6L80e swap i would have bought this before it ever had a chance to go up for sale. just an FYI the converter daily drove better than my PI3600. didnt take much throttle to move the truck either.
if need be buddy and you are gone to work i could help out with delivery or install.
if need be buddy and you are gone to work i could help out with delivery or install.
#3
Thread Starter
Staging Lane
iTrader: (3)
Joined: Nov 2007
Posts: 64
Likes: 0
From: Baton Rouge, Louisiana
Thanks for ur input Niff. I'm not 100% sure when I'm pullin the motor, hopefully in the next wk r 2, but the tranny is gettin pulled at the same time. If any interest, I can pull the tranny sooner.
Ill be off til jan 10th Niff so hopefully I can pull the tranny b4 then. Ur more than welcome to come help though.
Ill be off til jan 10th Niff so hopefully I can pull the tranny b4 then. Ur more than welcome to come help though.


