DJM 4" drop LCAs
Jan 5, 2008 | 09:49 AM
#1
Thread Starter
TECH Fanatic
iTrader: (65)
Joined: Jun 2006
Posts: 1,187
Likes: 1
From: Tyndall AFB / Panama City, FL
DJM 4" drop LCAs
I switched to a 3/4 drop so i don't need these anymore. They all got new ball joints about 15k miles ago. They will need new dust boots on them but they move smoothly still so they should be fine.
Lower control arms $150 shipped
Lower control arms $150 shipped
Last edited by adam1803; Jan 8, 2008 at 11:50 AM.
Jan 5, 2008 | 11:57 PM
#4
about the control arms
The uppers are only for alignment????? correct....... also did you have to align your truck afterwards? and if your were running the 4/6 drop what wheel and tire size were you able to use? The truck in you sig is awsome !!!
Jan 6, 2008 | 08:50 AM
#5
Thread Starter
TECH Fanatic
iTrader: (65)
Joined: Jun 2006
Posts: 1,187
Likes: 1
From: Tyndall AFB / Panama City, FL
The uppers are to correct for ball joint angle, and yes the truck will need to be aligned afterwards. I was running 20x8.5 wheels with 255/35 tires. I would recommend using a bit taller tire though.
