This is a new old stock group of custom twin turbo parts.

These parts were bought new years ago and stored on a shelf in my shop in preparation for a project I never got to. These are not chinese aftermarket parts, the turbos are genuine garrett, the turbine housings are turbonetics, the wastegates are tial, and most of the small flanges, gaskets, fittings and hoses are from ATP turbo, I still have the receipts for all of this when bought new.

partial kit requires fabrication parts cost $1800+ when purchased.

Looking for $1300 SHIPPED in the 48 US. No international shipping. I'm an ebay powerseller of 6000+ positives and paypal verified, can also do direct credit card payment.

2) new garrett t04b .6 compressor hsg 3" inlet w/ turbonetics p-trim .58 undivided turbine hsgs 3" vband outlet

2) v-band flanges to build downpipes

2) oxygen sensor bungs for downpipes

2) v-band clamps turbos-to-downpipes

2) turbo oil feed inlet flanges w/ gaskets & hardware

1) oil feed fitting for oil supply @ engine

3) SS braid AN oil feed lines (1 from engine to tee fitting 2 to each turbo inlet)

2) turbo oil drain outlet fitting to AN threads w/ gaskets & hardware

2) aluminum 1/2" threaded weld bungs for aluminum oil pan for turbo oil drains w/ 2) 45* fittings to -10AN threads

2ft -10an oil drain hose turbos-to-engine oil pan

2) t4 weld flange to build manifold

2) t4 gasket

2) tial wastegates coated, includes additional springs

4) weld flanges for wastegate inlets/outlets w/ hardware

4) gaskets for wastegate inlets/outlets

2) 45* SS bend 1.5" pipes for wastegate dump tubes/recirc tubes to exhaust

 

?????

 

......

 

can anyone see this post?

 

Yes, we see you

 

well, that makes me feel better lol.

 

i can see. and am interested, need to do a bit of research of the turbo specs to see if they will work for what i need.

what was your original plans/intended usage?

 

TT yukon running 6-8psi

 

.....

 

bueller

bueller