Crane "Quick Lift" 1.8 Gold Race Roller Rocker Kit
Feb 3, 2011 | 10:07 PM
#1
Thread Starter
TECH Enthusiast
iTrader: (26)
Joined: Aug 2010
Posts: 577
Likes: 0
From: Manitowoc Wi.
Crane "Quick Lift" 1.8 Gold Race Roller Rocker Kit
These are listed on Ebay now....Link Here:
http://cgi.ebay.com/ebaymotors/ws/eB...STRK:MESELX:IT
This kit has less than 2000 miles on it. Was bought right from Roger Vinci about 2 months ago for $700
Crane Cams Gold-Race, full-roller aluminum rockers for the LS1/LS6 engine family add up to 20 horsepower over stock! These rockers were designed for quiet operation and do not trigger the stock GM "Knock Sensor", which retards spark advance and reduces power output! They feature the exclusive Crane "Quick-Lift" design, which moves the valve off its seat quicker, initiating flow into the combustion chamber earlier, thereby increasing port efficiency and horsepower output! They are available in a complete kit (rockers, rocker studs, pushrod guideplates and pushrods) or separately, and are an easy bolt-on.
Link to kit: http://www.vincihiperformance.com/LS...%20REDONE.HTML
http://www.vincihiperformance.com/RO...ON%20PAGE.HTML
Will sell for $450 PM me for fastest Response
Pictures can be seen here:https://www.performancetrucks.net/fo...d.php?t=476455
http://cgi.ebay.com/ebaymotors/ws/eB...STRK:MESELX:IT
This kit has less than 2000 miles on it. Was bought right from Roger Vinci about 2 months ago for $700
Crane Cams Gold-Race, full-roller aluminum rockers for the LS1/LS6 engine family add up to 20 horsepower over stock! These rockers were designed for quiet operation and do not trigger the stock GM "Knock Sensor", which retards spark advance and reduces power output! They feature the exclusive Crane "Quick-Lift" design, which moves the valve off its seat quicker, initiating flow into the combustion chamber earlier, thereby increasing port efficiency and horsepower output! They are available in a complete kit (rockers, rocker studs, pushrod guideplates and pushrods) or separately, and are an easy bolt-on.
Link to kit: http://www.vincihiperformance.com/LS...%20REDONE.HTML
http://www.vincihiperformance.com/RO...ON%20PAGE.HTML
Will sell for $450 PM me for fastest Response
Pictures can be seen here:https://www.performancetrucks.net/fo...d.php?t=476455
Last edited by Bigschwerm; Feb 19, 2011 at 05:02 PM.
Feb 7, 2011 | 11:43 AM
#7
Got a set already, and love 'em. Top quality stuff, guys. They're going on my new build, too. If you're wondering about what your cam lift would be with these, take your present cam's lift, divide by 1.7 and then multiply the number by 1.8 to get the new lift with the 1.8 rockers.
e.g.: .590/1.7= .347 then .347x1.8=.625
Rockers are an easy way to up your lift.
e.g.: .590/1.7= .347 then .347x1.8=.625
Rockers are an easy way to up your lift.