Complete LS1/LS6 Victor JR, MSD 6010 carb setup, demon and holley carbs, holley pumps
#1
TECH Addict
Thread Starter
iTrader: (12)
Join Date: Jul 2004
Location: Delaware
Posts: 2,106
Likes: 0
Received 0 Likes
on
0 Posts
Complete LS1/LS6 Victor JR, MSD 6010 carb setup, demon and holley carbs, holley pumps
It's all for sale officially. Im open to trades for an EFI Victor JR intake with fuel rails or fuel pump. I'm located in Felton, Delaware. My Ebay User ID is ShawnMacananny check my feedback, buy with confidence. I take Paypal only or cash in hand with local pick up. http://feedback.ebay.com/ws/eBayISAP...ab=AllFeedback
Speed Demon 750 double pumper, downleg boosters. Has 71 primaries, 75 secondaries right now, not the right jetting for my setup but i was experiment since i have a wide band. Has two 30 cc acclerator pumps, pink cams, 31 squirters 6.5PV front no power valve rear. This model does have Idle-Ez and power valve blow out protection. I bought this carb and it only had dyno time. Since then i have taken it apart, it was clean, all holes were drilled, and i put holley re-usable blue gaskets on it. It has maybe 100 miles on it if that since ive had it and dyno time before that. I have a brand new electric choke kit for it i havent installed on it i am including with it. I'll even throw in my 66-99 jet kit(odd numbers only). It includes fuel line, pressure gauge stopped working. $300 shipped
Here is a holley 750 i had orgionally on the car. It ran spectacular on it. I never got around to tuning the Demon carb on my setup. I rebuilt this carb about 500 miles ago or so. It has center hung float bowls, a 50cc accelerator pump a #35 squirter (i think it was) hollow screw, and Holley Adjusta-ajets. I forget which spring is in it, i think it may be the white It has a quick change spring kit and a brand new electric choke kit. $250shipped
Here is the info on the adjust-ajets. The ones on it are made by Holley but Percy owns the rights to them now or something. They are identical just red.
http://www.percyshp.com/adjustajet.html
Here is also a used holley blue 110gph fuel pump. Not sure how long it was used i just bought it. It has a new regulator and hardware though. pending payment
Here is the Holley 97GPH pump ive been using with my setup. Works fine for around 500hp so far. Is internally regulator to about 6.5psi, my gauge showed 7psi. $50 shipped
Here is an oil filter sized 10 micron filter. It has a replacable fuel filter element inside. I paid like $50 for it i think summit sells them for $40. Its fittings are 3/8" npt. I have all hardware with it too. It's brand new. $25 shipped
Speed Demon 750 double pumper, downleg boosters. Has 71 primaries, 75 secondaries right now, not the right jetting for my setup but i was experiment since i have a wide band. Has two 30 cc acclerator pumps, pink cams, 31 squirters 6.5PV front no power valve rear. This model does have Idle-Ez and power valve blow out protection. I bought this carb and it only had dyno time. Since then i have taken it apart, it was clean, all holes were drilled, and i put holley re-usable blue gaskets on it. It has maybe 100 miles on it if that since ive had it and dyno time before that. I have a brand new electric choke kit for it i havent installed on it i am including with it. I'll even throw in my 66-99 jet kit(odd numbers only). It includes fuel line, pressure gauge stopped working. $300 shipped
Here is a holley 750 i had orgionally on the car. It ran spectacular on it. I never got around to tuning the Demon carb on my setup. I rebuilt this carb about 500 miles ago or so. It has center hung float bowls, a 50cc accelerator pump a #35 squirter (i think it was) hollow screw, and Holley Adjusta-ajets. I forget which spring is in it, i think it may be the white It has a quick change spring kit and a brand new electric choke kit. $250shipped
Here is the info on the adjust-ajets. The ones on it are made by Holley but Percy owns the rights to them now or something. They are identical just red.
http://www.percyshp.com/adjustajet.html
Here is also a used holley blue 110gph fuel pump. Not sure how long it was used i just bought it. It has a new regulator and hardware though. pending payment
Here is the Holley 97GPH pump ive been using with my setup. Works fine for around 500hp so far. Is internally regulator to about 6.5psi, my gauge showed 7psi. $50 shipped
Here is an oil filter sized 10 micron filter. It has a replacable fuel filter element inside. I paid like $50 for it i think summit sells them for $40. Its fittings are 3/8" npt. I have all hardware with it too. It's brand new. $25 shipped
Last edited by Shawn MacAnanny; 05-07-2009 at 02:47 PM.
#3
TECH Addict
Thread Starter
iTrader: (12)
Join Date: Jul 2004
Location: Delaware
Posts: 2,106
Likes: 0
Received 0 Likes
on
0 Posts
Correct. I have the CD around here somewhere. If not you can download it here for free
http://www.msdignition.gr/download/s...prodata318.exe
http://www.msdignition.gr/download/s...prodata318.exe
Thread
Thread Starter
Forum
Replies
Last Post
slowlsx
GM Parts Classifieds
1
08-13-2015 08:28 PM