Brand new Cooling mist Stage 2 alky/meth kit
Jul 30, 2007 | 12:01 PM
#1
Thread Starter
On The Tree
iTrader: (26)
Joined: Jun 2005
Posts: 180
Likes: 1
From: Third World Country
Brand new Cooling mist Stage 2 alky/meth kit
Brand new in the box.
The controller has the following features: Serial interface (ability for you to custom tune if you wish, but NOT required) Simple to use, ready to use out of the box (no computer necessary) Ability to run using your vacuum/boost line, 0-5V (maf/tps) or BOTH at same time (2d mode) 1-30 psi adjustment for start boost, 1-30 for full boost. You can run 60 psi boost pressure with this 10 position tuning factor will change the duty cycle of the pump. This allows you to add more flow or reduce flow on demand. The amount of flow will depend on many factors including nozzle size. This makes a great feature to be able to fine tune if necessary. Green Light to show current condition. Fully programmable Many advanced features including ability to change min pump pressure, max pump pressure, use custom maps, datalogging, etc.
The tank was used on a friends kit that was used and missing it. The cost to replace the tank is about $23.00. So thats why i have the price at:
Sold!
Thanks
The controller has the following features: Serial interface (ability for you to custom tune if you wish, but NOT required) Simple to use, ready to use out of the box (no computer necessary) Ability to run using your vacuum/boost line, 0-5V (maf/tps) or BOTH at same time (2d mode) 1-30 psi adjustment for start boost, 1-30 for full boost. You can run 60 psi boost pressure with this 10 position tuning factor will change the duty cycle of the pump. This allows you to add more flow or reduce flow on demand. The amount of flow will depend on many factors including nozzle size. This makes a great feature to be able to fine tune if necessary. Green Light to show current condition. Fully programmable Many advanced features including ability to change min pump pressure, max pump pressure, use custom maps, datalogging, etc.
The tank was used on a friends kit that was used and missing it. The cost to replace the tank is about $23.00. So thats why i have the price at:
Sold!
Thanks
Last edited by BLOWN 364; Oct 14, 2009 at 03:11 AM.
Thread
Thread Starter
Forum
Replies
Last Post
5.3lSilverado
GM Engine & Exhaust Performance
25
Aug 29, 2016 12:48 AM
slowlsx
GM Parts Classifieds
2
Aug 10, 2015 05:33 PM
KyleW707
GM Parts Classifieds
4
Jul 29, 2015 08:17 AM
carid
Ford / Lincoln General Discussion
0
Jul 24, 2015 05:00 AM
