4L80E Tranny w/4k miles
TCI 4L80E Verter
Wiring Adapter From Speartech
4L80E Flexplate
$1700!!!

 

o o o were you located?
make me start thinking, i did not want a 80 but that sounds good. damn damn damn i wanted a th350 but i dont know.. i am very interested how big is the stall?

 

Man I need this What else will I need crossmember and driveshaft?

 

located in Lubbock Texas The other little parts needed should be on Parish's web site. I'll try to find it. The verter is a 10" Street fighter & sells for around $800!!

TCIŽ strives to produce the best torque converters in the industry. Part of the process involves ensuring that each unit is built to spec. Regardless of what category or price level it may fall into, every TCIŽ torque converter is Triple Tested during assembly.

Once all the prep work on the component parts has been completed, the impeller is welded to the front cover. Immediately following this process, a pair of dial indicators are employed on a rotating table to verify that the impeller body and pump drive hub remain true.

Each unit is then pressurized and subjected to a leak test to confirm the integrity of all the weld seams. Lastly, each unit is computer balanced to reduce annoying and potentially damaging drivetrain vibrations that would occur from an unbalanced torque converter. That's Triple Tested so you can be confident you're getting a torque converter that's ready to roll.

 

jason yada yada yada i was wondering what it staled to. forget all that other stuff if it works good i can change it later. i will try to call you tomorrow.

 

I also want to be put in line, My truck is dead and I need this tranny bad. I am trying to sell my stall, deep pan, and anything else I can find.