I have 8 an 8 rib setup for 99-06 silverado, everything but the balancer. Can get one of those tho if needed. Was almost 700 new, all in great condition.
Complete set 450.00 plus shipping. Also have an hd tensioner to add if needed.... 550.00 with the hd tensioner.


lc32- alternator

lc32-power steering

2x metco 100mm idlers

aluminum Tensioner pulley

 

Sold..!!!

 

do you happen to remember if those are the Metco MIP-100V made for Cadillac ctsv's? I'm wanting to get one for my 08 Sierra with tvs1900 and want to make sure it will work.

 

I got a Billetflow 100mm idler for $60 shipped off eBay...part# BPS-100B....fits the TVS1900 Bracket perfect....

 

sweet. id go with that but I'm buying a used kit and it has one IW idler and one Metco and the guy doesn't remember what model Metco one it is. I just want to get another one so both idlers match.

 

ahh ic....well the billet flow one I used is supposed to be for 03-04 Cobras so I would order the 100mm Metco for 03-04 Cobra which is Part# MIP-100...

 

Gotcha. You didn't have to space them of anything to make them line up correctly? I know they're pretty wide so I can't imagine needing to adjust them too much.

 

I didn't have to use any spacers for the billet flow so I wouldn't think any would be needed with the Metco...when you remove the adjustable idler on the magnuson bracket there's already a little machined spacer that fits inside the bearing that you will reuse...

 

Sorry i didn't see this before, prob too late. The metco's i had were from a cobra but the spacer was for a ctsv or camaro. I used the stock spacer you use with the adjustable idler and had to buy the spacer for the camaro and cut it down. Without the spacer it would rub the accessory bracket. If it was me i would buy the double roller bearings if you drive it alot..

https://www.metcomotorsports.com/pro...?prod=MIP-100V = pulley with spacer

https://www.metcomotorsports.com/pro...?prod=MIP-100D = just the pulley

 

Thanks. I do drive it a lot. I'm going to inspect the pulley once I receive it and possibly call metco to figure out which one I have so I can order a matching one. Are all the Metco double bearing?