57 lb/hr FIC Injectors
09-09-2010, 12:46 PM
#5
On The Tree
Thread Starter
iTrader: (7)
Join Date: Aug 2006
Posts: 147
Likes: 0
Received 0 Likes
on
0 Posts
With my current setup I was seeing 106% injector duty cycle when running 9.5 psi boost.
I only have (1) GSS341 255lph walbro and it couldn't keep up (returnless system and seeing a pressure drop)
I have Greg's data and have personally talked to him about the Siemen's Deka 60's. I dropped them in, loaded the data, tuned my maf, and have been good ever since.
I am now at 66 IDC at 7psi of boost (I went to a larger pulley/less boost until I have a return setup completed). I also went larger in case I wanted to dable with e85 in the future.
I am currently upgrading to a return system, and have wanted the siemens injectors for a while. So I decided to go for them.
I'm sure my 57's would have worked just fine with a rising rate FPR but I wanted to change, so I did.
-Mike
I only have (1) GSS341 255lph walbro and it couldn't keep up (returnless system and seeing a pressure drop)
I have Greg's data and have personally talked to him about the Siemen's Deka 60's. I dropped them in, loaded the data, tuned my maf, and have been good ever since.
I am now at 66 IDC at 7psi of boost (I went to a larger pulley/less boost until I have a return setup completed). I also went larger in case I wanted to dable with e85 in the future.
I am currently upgrading to a return system, and have wanted the siemens injectors for a while. So I decided to go for them.
I'm sure my 57's would have worked just fine with a rising rate FPR but I wanted to change, so I did.
-Mike
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
