i purchased this setup from a member on here a while back and they only had a few thousand miles (i recall 2k) , they already have rings on the pistons but i went ahead and purchased a brand new set of diamond rings that are still in the box that i will include. the pistons are diamond -2cc and the Rods are Eagle H beam with arp bolts. Eric at HKE told the previous owner to these that they would handle 1000hp. pistons are 3.905 and the rods are 6.125. this setup is perfect for boring out your 4.8/5.3 iron block to make a 347! this combination will cost you around 1100 new. 750 is my price

i also have a 5.3 block that i bought from a member on here that already has a crank and has already been bored to 3.905, all it needs is for the crank to be polished and the cylinder walls cleaned because of the light surface rust. as i remember the previous owner of this block had alot of money put into the block with machine work but cant remember how much exactly. 300 is my price.

 

hmmm maybe if its around for tax season

 

Sale pending....