06 Silverado Cruise Control under dash wiring
#1
On The Tree
Thread Starter
iTrader: (1)
Join Date: Jun 2011
Location: Grapevine, Tx
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
'88-'94 Silverado Cruise Control under dash wiring
I need some help here...
I am in need of the underdash wiring for my DBW cruise control. I need the female plug and wire as long as I can get.
Any help is despritely needed (old trashed harness anyone?)
I am in need of the underdash wiring for my DBW cruise control. I need the female plug and wire as long as I can get.
Any help is despritely needed (old trashed harness anyone?)
Last edited by snowshoejeep; 03-24-2012 at 04:36 PM.
#2
TECH Enthusiast
iTrader: (5)
I replaced the multi function switch on my 2001 and still have the original. So I guess that would be cruise control wiring from the original switch to the big junction box next to the body control module. Not sure if it's compatible with the 06 or if that's even what you're looking for; I'm not familiar with DWB cruise control.
#3
Last edited by 1FSTMAX; 03-22-2012 at 08:14 PM.
#4
On The Tree
Thread Starter
iTrader: (1)
Join Date: Jun 2011
Location: Grapevine, Tx
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
Thanks KC kid & 1 FSTMAX but I goofed in my post question...
Actually I am doing a 5.3 swap project and have some interface problems I need to resolve.
I have a 91 Silverado steering column with the multi stick (cruise, wipper, turn and dimmer switch). I am trying to mate that with my 06 Silverado motor and computor.
I don't really know exactly what I need and how to do this.
I do know my cruise wire colors from my ('91)lever are: red, green, yellow and light blue. These wires terminate on a wierd flat plug.
I need to find out what this male plug goes into and what does this interface to.
I thought the cruise was controled by the PCM.
So would these wires go directly to the PCM (if so what pin no's)...or...do the cruise wires go somewhere else...
Can this 91/06 cruise interface be done????
Actually I am doing a 5.3 swap project and have some interface problems I need to resolve.
I have a 91 Silverado steering column with the multi stick (cruise, wipper, turn and dimmer switch). I am trying to mate that with my 06 Silverado motor and computor.
I don't really know exactly what I need and how to do this.
I do know my cruise wire colors from my ('91)lever are: red, green, yellow and light blue. These wires terminate on a wierd flat plug.
I need to find out what this male plug goes into and what does this interface to.
I thought the cruise was controled by the PCM.
So would these wires go directly to the PCM (if so what pin no's)...or...do the cruise wires go somewhere else...
Can this 91/06 cruise interface be done????
Last edited by snowshoejeep; 03-24-2012 at 04:38 PM.
#6
On The Tree
Thread Starter
iTrader: (1)
Join Date: Jun 2011
Location: Grapevine, Tx
Posts: 128
Likes: 0
Received 0 Likes
on
0 Posts
Still need underdash cruise wire 88-94 Silverado
Ok...Another member here has told me that the CC goes to my TAC...not the computer..
So...I just need the under dash CC wire (as long as you have) with the female plug that attaches to the male plug on the CC wire from the steering column.
Thanks for any help you can offer....
So...I just need the under dash CC wire (as long as you have) with the female plug that attaches to the male plug on the CC wire from the steering column.
Thanks for any help you can offer....
Thread
Thread Starter
Forum
Replies
Last Post
Nimoryan
GMT 800 & Older GM General Discussion
0
07-05-2015 03:50 PM