02 bcm
Dec 18, 2006 | 02:40 PM
#1
Thread Starter
On The Tree
iTrader: (15)
Joined: Aug 2003
Posts: 197
Likes: 0
From: springfield tennessee
02 bcm
I bought this 02 bcm to put in my 99 so that i could control my automatic headlights, but i never used it. I paid over $200 for it, but Ill let it go for $110 shipped.
Jan 3, 2007 | 03:14 AM
#6
This is an awesome upgrade. I did it to my 99 and now can control the lights and the locks. Also, I've done business with this guy before and he is a good seller.
Here is how to program it:
Auto Learn Passlock Procedure:
1. Turn the ignition switch to the RUN position (NOT the CRANK position).
2. Turn the ignition switch to the CRANK position, then release to the RUN
position (Do NOT start the vehicle).
3. Observe the security telltale (the little display window on the
instrument cluster) for approximately 10 minutes.
4. After the ignition switch has been in the RUN position for
approximately 10 minutes, the security telltale will transition from ON,
then to OFF.
5. Repeat Steps 1--4 two more times.
6. After 3 consecutive cycles of the ignition switch are successfully
completed, the vehicle will learn the new component on the next ignition
lock cylinder cycle from the OFF position to the CRANK position, then to
the RUN position. The vehicle will then start.
Here is how to program it:
Auto Learn Passlock Procedure:
1. Turn the ignition switch to the RUN position (NOT the CRANK position).
2. Turn the ignition switch to the CRANK position, then release to the RUN
position (Do NOT start the vehicle).
3. Observe the security telltale (the little display window on the
instrument cluster) for approximately 10 minutes.
4. After the ignition switch has been in the RUN position for
approximately 10 minutes, the security telltale will transition from ON,
then to OFF.
5. Repeat Steps 1--4 two more times.
6. After 3 consecutive cycles of the ignition switch are successfully
completed, the vehicle will learn the new component on the next ignition
lock cylinder cycle from the OFF position to the CRANK position, then to
the RUN position. The vehicle will then start.