Got all my parts in finally and im getting ready to start some work.
All of these are going in a 5.3 rcsb by the way.

MTI C1 cam (222/222 .566/.566 112lsa)
comp cams 918 valve springs. Zo6 retainers
comp cams hardened 7.4 pushrods
slp double roller timing chain set
ported ls6 oil pump
lightly ported heads
poted throttle body and maf
dougs lt headers
k&n fipk. electric fans
gm 4.56 gears
built tranny "4l60e"
yank or edge 3000 stall converter
et streets
custom dyno tune from supertune
oh, and a 150 wet kit from TNT

what are some of your thoughts on how this will run?

 

Sounds like shes gonna run! I think id make a couple changes. 921s instead of 918s, and Dynatech headers.

Your gonna be flyin!

 

i got a good deal on the cam and springs so i went with those. i thought about the 921s but comp cams said that the 918s would be ok.
i hope to run pretty good with this setup. id like to be in the high twelves all motor.