GM Engine & Exhaust Performance EFI | GEN I/GEN II/GEN III/GEN IV Engines |Small Block | Big Block |

Went to the track.......13.686

Thread Tools
 
Search this Thread
 
Old Jun 17, 2005 | 11:22 PM
  #1  
KLUG'S SS's Avatar
Thread Starter
FormerVendor
iTrader: (6)
 
Joined: Nov 2004
Posts: 1,017
Likes: 0
From: BERRIEN CENTER,MICHIGAN
Unhappy Went to the track.......13.686

Finally made it out to the track tonight, very disappointed with my times. My truck was pulling out some timing and I was spinning all four but still not too bad for 5300 lbs. Temps were about 70 degrees.

.514---- Reaction
1.918----60 ft
8.682----1/8 ET
79.49----1/8 MPH
13.686----1/4 ET
97.61----1/4 MPH
Reply
Old Jun 17, 2005 | 11:25 PM
  #2  
FILE's Avatar
TECH Senior Member
iTrader: (5)
 
Joined: Apr 2002
Posts: 7,276
Likes: 1
From: Truck Heaven
Default

What are your mods. You must have one big of a stall to be sprnning your wheels.
Reply
Old Jun 17, 2005 | 11:26 PM
  #3  
Moderator
 
Joined: Feb 2002
Posts: 1,908
Likes: 0
From: Clyde, California
Default

You ran a 13.6 and you're disappointed? I'd be doing back flips!! What are "a few mods"?
Jim
Reply
Old Jun 17, 2005 | 11:35 PM
  #4  
KLUG'S SS's Avatar
Thread Starter
FormerVendor
iTrader: (6)
 
Joined: Nov 2004
Posts: 1,017
Likes: 0
From: BERRIEN CENTER,MICHIGAN
Default

I am running a Yank tt3000 for my converter, Vinci cam- 216/224 551/551, comp 918's, manley pushrods, nelson tune, and believe it or not my power adder is a powerdyne which I did an air to air intercooler on. I am only running 7psi right now but I plan to get a smaller pulley this next week. I guess I am okay with my times but I definitely think it is quicker because I have beat a couple of ls1 f-bodies in my area, they were pretty much stock but still they are fairly damn quick.
Reply
Old Jun 18, 2005 | 12:09 AM
  #5  
gonzo 6.2's Avatar
TECH Veteran
iTrader: (8)
 
Joined: Oct 2002
Posts: 4,516
Likes: 15
From: oregon
Default

Originally Posted by KLUG'S SS
Finally made it out to the track tonight, very disappointed with my times. My truck was pulling out some timing and I was spinning all four but still not too bad for 5300 lbs. Temps were about 70 degrees.

.514---- Reaction
1.918----60 ft
8.682----1/8 ET
79.49----1/8 MPH
13.686----1/4 ET
97.61----1/4 MPH

I would have expected a 13.7 with out the SC
Reply
Old Jun 18, 2005 | 12:14 AM
  #6  
KLUG'S SS's Avatar
Thread Starter
FormerVendor
iTrader: (6)
 
Joined: Nov 2004
Posts: 1,017
Likes: 0
From: BERRIEN CENTER,MICHIGAN
Default

Originally Posted by gonzo 6.0
I would have expected a 13.7 with out the SC
Yeah I know that's why I am kind of pissed, I got some stuff that I need to figure out. Something is not right because I pulled away from a stock WS6 on the street just the other day.
Reply
Old Jun 18, 2005 | 12:16 AM
  #7  
gonzo 6.2's Avatar
TECH Veteran
iTrader: (8)
 
Joined: Oct 2002
Posts: 4,516
Likes: 15
From: oregon
Default

I have to ask and hope it doesnt come out wrong but why a powerdyne?Thats kind of like sticking it in only half way.
Reply
Old Jun 18, 2005 | 01:28 AM
  #8  
KLUG'S SS's Avatar
Thread Starter
FormerVendor
iTrader: (6)
 
Joined: Nov 2004
Posts: 1,017
Likes: 0
From: BERRIEN CENTER,MICHIGAN
Default

Originally Posted by gonzo 6.0
I have to ask and hope it doesnt come out wrong but why a powerdyne?Thats kind of like sticking it in only half way.
Well I got the supercharger for under a grand and it was basically brand new and then I decided to throw an intercooler on with it also. I know that there are alot better supercharger/turbo kits out there that make really good power but I thought I would be a little different than other people and try something different. I saved myself some money going the route that I went with the powerdyne which was nice because I am only 25 years old and I pay for my own truck and I have my own $160,000 house so that's the reason. No offense taken here alot of people ask why a powerdyne.
Reply
Old Jun 18, 2005 | 09:33 AM
  #9  
gonzo 6.2's Avatar
TECH Veteran
iTrader: (8)
 
Joined: Oct 2002
Posts: 4,516
Likes: 15
From: oregon
Default

That makes sense,best of luck,hope you hit 12s soon.
Reply
Old Jun 18, 2005 | 04:13 PM
  #10  
wes00silverado's Avatar
Launching!
 
Joined: Jan 2005
Posts: 262
Likes: 0
From: Scotts Hill TN
Default

Haha all I've got is a 4.8 with a throttle body spacer and flowmasters makes me wonder what i would run but theres no way I'm going to the strip just to get waxed by something else.
Reply



All times are GMT -5. The time now is 06:46 PM.