I have been talking with Nitro Dave on the subject of my Vic Jr and I recently posed the question of which injectors will fit the embossed intake and Edelbrock fuel rails that come with the kit. He said that he personally didn't know so I am asking y'all, which injectors should I use with the Vic Jr intake and fuel rails, truck injectors or LS1 style car injectors?

Thanks in advance
-David

 

i think ls1 injectors with the stock bracketry. i have my 60lb siemen injectors in there any they bolted right up . they are slighty longer than the truck injectors

 

Yep. non-truck style injectors.

 

is there anywhere to buy the pigtails to go from truck to car style injectors?

 

Go to summit and look up MSD-2400. That is what you need.

 

those connect to the injectors and allows the truck harness to plug in? thanks tdrumm

 

There or call nelson performance they sell a kit fo rlike 30 bucks that comes with the pigtails, connectors and heat shrink thats where I got mine.

 

+1 for nelson

 

I got mine from Nelson as well. I sodered mine on and didn't use the butt connectors, so when I was done sodering them together the supplied heat shrink didn't shrink enuff! Had to undo it and resoder with different heat shrink.

 

+1 for Nelson