What do you all think, or experienced with this cam in a 6.0? I am currently working on a swap for my 03 ecsb z71 from a 5.3 to an lq4, with this cam, 243 p&p heads, headers, built 60e with a 3200 converter.

 

What's the spec's or a link?

 

DUR @ .004" 284* / 290*
DUR @ .050" 222* / 228*
LIFT .551 / .551
LSA 115

These are the specs

 

to small ! im running a 222/228 567/567 and im pulling it out does not pull hard on top ! going with a diffrent cam ! hopefully i get better resolts me and you have the excact set up and you aint gonna like it ! that lift wont pull up top ! you need more duration and more lift ! I will tell you it will be real torquy if thats what your aiming at !

 

I ran a cam close to that one. 221/226 .566/.562. Did pretty good with supporting mod. Got me a 12.94 @ 103

 

was that on a 3600 stall ?
MAN CUZ I DONT THINK MY PULLS UP TOO AT ALL !

 

3200 circle d shifting @ 6500, It did good for what it was. Lots of low end torque.. Btw stop yelling I got feeling too

 

im not yellin i accedentely hit the caps some time and just leave it as is !
mine has a gang of torque !

 

Cool those are the times I'm looking for mhotrodscooter. If it's too small what cam do u all recommend?

 

i'm going on a 228/232 612/600 111lsa and i believe scooter is some where up there to ! just a diffrent lift