just like it ask's can i still pull a car with a 4.8 and a tr220 cam with gears headers stall and tune?

 

5.3 w/ trucker cam, LTs, and yank 3600. Trucks got 285/40/22 with 3.73 also.

 

 

Yes, you can. Will it be fun, No.

Make sure you have a good transmission cooler. Not normally a big fan of the huge ones, but you might need one.

 

With the right converter and gear it is possible. I wouldn't go with that much cam in a 4.8L motor. I would say LOW 21x/21x on duration if you were trying to pull very much with it.

Jon

 

how big is the stall? Do you have a tranny cooler?

Beautiful truck man

 

jon could yall custom grind a cam to still be able to pull but have a lope and a bit more performance? BTW love yalls stuff... thats all i run in my car (408 gexas giant) and had the MS4 before that and love yalls stuff... was probably gonna call yall anyways... and i will go with 4.10's and like a 2800-3000 stall... its a daily but i still wanna have some fun with it...

 

We can probably come up with something depending on what converter you end up with. You have to be very careful to not give up too much bottom-end with putting a cam in. Obviously the best bet would be a Magnacharger or some kind of forced induction but we all don't have the $5000 grand laying around to drop on one.

Jon

 

yea i really wanted a magnacharger and will probably look at one around christmas time... so i might just stick with headers converter and a tune and see what i am gonna do .... BTW your texas giant cam in a 408... whats the normal timing for that motor? because at 16* total timing i made 484/462 weird i know but we put 6 more in it and its a completely diff beast now.. just wondering what we did wrong besides the tune but now at 22 i got no retard and think i could probably run a few more degrees and get it around 26-27?