Well guys going to cam my truck and need your advice on this cam. It is for my 09 5.3 silverado CC. Somewhat my daily. mods are gonna be DOD delete 3600 stall 4.10 gears intake headers and of course custom dyno tune. Now I just need the cam. Been looking up cams and I really like this one. Is this cam to big? Low mid high power band or all around?

My goal is close to or 400hp and about a low 13.
If you know a better cam please let me know.
Thanks

 

I have that cam from TSP in my 6.0 lq9. Its a fairly large cam, for a stock 5.3. I would say its about as big as Id want ESPECIALLY in a heavy CC. 3600 Stall would be a good choice for that cam spec

 

Id pick a better cam imho.....too big for not enough C.I. An not enough gear or converter

 

I've used this cam for a few rcsb trucks with and ls1 and lq4 both with 3200 stalls. It seemed like the most cam I would go on these cubes. You might be better off with a 220r or a 222/224