Throttle body options

Reply Subscribe

Thread Tools

Search this Thread

May 10, 2010 | 11:03 PM

white1

Thread Starter

12 Second Truck Club

iTrader: (5)

Joined: Apr 2005

Posts: 5,230

Likes: 5

From: Sittin on jackstands

Throttle body options

Im picking up a 100mm intake from a new silverdo (GMT-900) and gonna use it on a GEN III engine in a '99 that is drive by cable. What are my options for throttle bodys? I think I read that the 07+ intakes are a 4bolt vs the 3 bolt of the 99-07. I have access to a 90mm but its DBW.
Just wondering what my options are as im trying to not break the bank

May 11, 2010 | 06:27 AM

Tootall

TECH Senior Member

iTrader: (79)

Joined: Jun 2002

Posts: 5,175

Likes: 1

From: League City, Tx

I'm pretty sure that what you picked up is a 90mm . . .

there's all kinds that will bolt up for a cable TB . . . start hanging out on tech

. . . start looking on how to make your own TB cable mount

May 11, 2010 | 06:35 AM

TIM Z

11 sec. Truck Mod

iTrader: (12)

Joined: Dec 2005

Posts: 9,736

Likes: 4

From: OH IO :(

Edelbrock 3864 90mm DBC TB is what i bought. Very nice piece and least expensive one ive found.

WCCH has them for 310$ Will bolt up to 3 or 4 bolt flange. Doesnt come with a gasket though.