Submersible fuel line for fuel pump
03-28-2012, 10:31 PM
#21
I swapped the line today, and good thing I did!!!
The hose actually wasn't in bad shape. It did swell slightly and feels a little mushier. But here's the part that got me. The side of the hose says
"FUEL VAPOR >PCV/EEC< 5/16 INCH (8.0mm) SAE 30R7 NOT FOR FUEL INJECTION SYSTEMS MADE IN U.S.A. BY GATES"
No wonder it was so cheap, those dumbasses gave me the wrong hose. I'm very glad I swapped it out. The Gates 27093 fit perfectly. Took about 1.5 hours to change.
The hose actually wasn't in bad shape. It did swell slightly and feels a little mushier. But here's the part that got me. The side of the hose says
"FUEL VAPOR >PCV/EEC< 5/16 INCH (8.0mm) SAE 30R7 NOT FOR FUEL INJECTION SYSTEMS MADE IN U.S.A. BY GATES"
No wonder it was so cheap, those dumbasses gave me the wrong hose. I'm very glad I swapped it out. The Gates 27093 fit perfectly. Took about 1.5 hours to change.
Thread
Thread Starter
Forum
Replies
Last Post
Mossyoakglock
GMT 900 Trucks General Discussion
0
07-17-2015 08:30 AM
