Scoggin Dickey truck cam??
04-30-2012, 07:27 AM
#42
TECH Enthusiast
iTrader: (7)
Join Date: Nov 2011
Location: Douglasville, Ga
Posts: 507
Likes: 0
Received 0 Likes
on
0 Posts
HT1 cam, SDPC cnc 5.3 heads, 1.8 H&S rockers, LT headers with Ypipe, 4.56 gears with 35inch tall tires, I'm now running a Hughes 22-20EL stall on a freshly built tranny. I just did 800 miles this weekend and at 80MPH at 2400 to 2500 rpm I was knocking down 15mpg but was right at the start of the power for this set up. I'm going today to get the tune tweaked with the new trans & stall..
05-01-2012, 04:58 PM
#47
TECH Resident
iTrader: (1)
Join Date: Oct 2011
Location: Havelock, New Bern, Newport, NC
Posts: 757
Likes: 0
Received 0 Likes
on
0 Posts
Yes, *sigh*. I'm an idiot. It's still in the box from Cam Motion. I hope it makes some power. I have a set of 799 heads I'm having cut .030 for some additional compression. I'm ordering a 4k Yank in a few weeks and a tru-cool and I'll be ready.
02-01-2013, 12:56 PM
#48
On The Tree
iTrader: (1)
Join Date: Jan 2012
Location: Atlanta,Georgia
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
HT1 cam, SDPC cnc 5.3 heads, 1.8 H&S rockers, LT headers with Ypipe, 4.56 gears with 35inch tall tires, I'm now running a Hughes 22-20EL stall on a freshly built tranny. I just did 800 miles this weekend and at 80MPH at 2400 to 2500 rpm I was knocking down 15mpg but was right at the start of the power for this set up. I'm going today to get the tune tweaked with the new trans & stall..
I called SDPC and they spec'd me for the 212/218, but I want the lsa of the 214/218 for the lope. Think they can custom grind me a lower lsa?
Thread
Thread Starter
Forum
Replies
Last Post
Suburban2500
INTERNAL ENGINE MODIFICATIONS
31
07-19-2015 04:50 PM
