It has been a while since I pulled my motor / trans and now I am ready to slap all of the little brackets and such back together. My question:

Where does the bracket that holds the stock fuel lines mount to on the back of the block near the intake on a 03 return system? More specifically, which stud. For some reason, when I hold up the lines and bracket/wires it puts a nasty kink in the flex line near the fuel filter.

I am figuring I must have bent the lines during removal of the old set-up and didn't realize it. So before I get all "friendly" with them, I just want to be sure. Thanks guys.

 

it goes on the 11 o'clock position.

 

Mounts to the intake. Uploading pictures now.

http://i260.photobucket.com/albums/i...o/DSC07316.jpg
http://i260.photobucket.com/albums/i...o/DSC07317.jpg
http://i260.photobucket.com/albums/i...o/DSC07318.jpg

Oops... wrong area. Hang on might have picture of that spot also but yeah around 11 o'clock.

Looks like 3rd stud up.
http://i260.photobucket.com/albums/i...o/DSC00169.jpg

 

Thanks a ton guys, that helps alot. Yea, I must have bent them slightly, they really do not want to get back to that location at all.

Thanks for the pictures as well!