pulled the 4.8.
Dec 1, 2008 | 10:06 PM
#1
Thread Starter
Launching!
Joined: Mar 2008
Posts: 254
Likes: 0
From: Yuma,Az
pulled the 4.8.
Just was curious does all 4.8 always have both the 4.8/5.3 on the back of the block. I just pulled what i think to be a 4.8 but it has both 4.8 and 5.3 on the casting on the back of the block. Just a curious.
Dec 1, 2008 | 10:10 PM
#2
TECH Fanatic
Joined: Jul 2005
Posts: 1,676
Likes: 0
From: Beebe, Arkansas
What are you doing with the 4.8L?
Dec 1, 2008 | 10:12 PM
#4
Thread Starter
Launching!
Joined: Mar 2008
Posts: 254
Likes: 0
From: Yuma,Az
Trending Topics
Dec 1, 2008 | 10:41 PM
#8
by the crank. 5.3 is the same bore just a longer stroke. I guess no real way to tell unless you crack it open from my knowledge. I believe the 4.8 and 5.3 both can come with the same heads?
Dec 1, 2008 | 10:41 PM
#9
4.8's have flattop pistons and a shorter crank; visually that's the only way to tell, and the heads are the same. Although the L33 5.3's have flattops too I think but they're aluminum blocks.
Dec 1, 2008 | 10:49 PM
#10
13 Second Truck Club
iTrader: (13)
Joined: Mar 2008
Posts: 2,663
Likes: 0
From: Arlington (DFW), Texas
So hypothetically speaking, if you were buying a motor from someone, and they claimed it was a 5.3. Without tearing into the motor, how could you tell if it was a 4.8 or a 5.3?
