I need y'all help on choosing what to do next on my procharged 5.3 (10psi), should I do cam or exhaust,cam will be abit more expensive but I want to do what will give me more power,I will be getting a built tranny soon, please help me choose the right one. Have in mind that curently I have a 2800 stall,410s,gibson shorties and high flow cats
Cam ;LS6 ,spings, what else I will need?
Exhaust.; pacesetter LT's,ORY, electric cutout.

 

3200 verter at least
Performabuilt lvl2

Either way your going to need a good exhaust, so i would look into that first.
Cam down the road in the 220-230 area.. This is just my opinion on how I would go about it..

 

I would ditch the shorties and get LT's and an exhaust. The cam should be cheaper than the exhaust.

 

Get sum lts for sure and cam,meth and af gauge

 

I had a higher stall TC before and didn't like it , I want to get a performabuilt but don't know if I should get the lvl 3 because of the truck being too heavy .

 

If money is no object then obviously the level 3 would be the better choice. The higher the stall, the better on procharged setups; I wouldnt run anything smaller than a 3k. You should post over in the forced induction side, you will probably get better advice.