machining for 408 crank
Apr 5, 2005 | 09:41 PM
#12
11 Second Truck Club
Joined: Nov 2001
Posts: 768
Likes: 0
From: scottsboro, al
The shop that did mine has put together 15 to 20 and has not been a problem. I did have to move the tray that bolt to the block in the oil pan it was hitting the rod bolts. I just beat the hell out of it and used 2 washers on each bolt.
Apr 5, 2005 | 10:29 PM
#13
Originally Posted by gonzo 6.0
SLED28
GM tech forums coming soon?
Is this something that has been mentioned in past posts?,if so link it up.
GM tech forums coming soon?
Is this something that has been mentioned in past posts?,if so link it up.
Apr 5, 2005 | 10:32 PM
#14
Originally Posted by 2bseen
The shop that did mine has put together 15 to 20 and has not been a problem. I did have to move the tray that bolt to the block in the oil pan it was hitting the rod bolts. I just beat the hell out of it and used 2 washers on each bolt.
Apr 5, 2005 | 10:39 PM
#15
Adkoonerstrator
iTrader: (4)
Joined: Nov 2001
Posts: 21,436
Likes: 3
From: Deep in the seedy underworld of Koonerville
Originally Posted by SLED28
You should see what they look like when they have a 4.250" stroke in there!!!
Thread
Thread Starter
Forum
Replies
Last Post
KINGCYCLES
GM Parts Classifieds
1
Oct 2, 2015 10:21 AM
