LS6 Intake Swap
Nov 17, 2011 | 04:20 AM
#101
Sep 21, 2019 | 12:30 PM
#102
Registered User
Joined: Sep 2019
Posts: 1
Likes: 0
Interesting....and WAAAAAAY different from what I went through to put an LS1 intake on mine:
* My injectors dropped right in....with the exception of the height difference. my LS1 intake was a '98 though so later LS6's might be different
* Manifold bolts were the same for both
* MY LS1 intake had the PCV nipple already installed from the factory
* TB cleared the WP housing without grinding
* Cutting down the truck WP outlet to 3/4" tall and putting an elbow in worked for me
Nice write-up though....VERY informative
* My injectors dropped right in....with the exception of the height difference. my LS1 intake was a '98 though so later LS6's might be different
* Manifold bolts were the same for both
* MY LS1 intake had the PCV nipple already installed from the factory
* TB cleared the WP housing without grinding
* Cutting down the truck WP outlet to 3/4" tall and putting an elbow in worked for me
Nice write-up though....VERY informative
Thread
Thread Starter
Forum
Replies
Last Post
GrooveCityZ71
GM Engine & Exhaust Performance
7
Aug 31, 2015 12:05 PM
