Farmtruc and I will be swaping the 5.3 for an LS1 tomorrow. Next Friday we will swap the heads and cam for a set of JPR stage1 heads and a 218/224 528/535 114 cam. Wont have the exhaust work done yet, but I should still make some good power to the wheels. This combo made 407 RWHP 415 RWTQ in an A4 with 3.73 and mac headers. That was with minimal tuning and an LS1 intake. JPR feels it will make 380 RWHP before the exhaust install. I should have everything done by the shootout. The only thing I may lack is the tuning, but I should be able to get pretty close with a day to tune.

 

BEOTCH!
<img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />

 

You can if you get a hold of Mix and let him send you his file to copy....You doing Ls1 edit...?Correct

 

Email me his file. If he wouldn't mind. Does he have a setup like mine. From what I have read he is running the 5.3 block, so I am assuming that he has an all bore or even bore and stoke. If those numbers were from a setup like mine then I will fall out of my chair. For me to use his program wouldn't we need to have similar setups.

 

One more thing I have emailed mix twice in the past and have never gotten a response. So if you (Hyde) could contact him for me that would be great. He can send the file to my email listed in my profile.