Louder Exhaust ideas?
Mar 15, 2011 | 09:32 AM
#11
Joined: Apr 2004
Posts: 16,820
Likes: 2
From: In a van DOWN BY THE RIVER
No poss way you can carry on a convo on the on the phone. Radio maybe if you have decent system.. I have been there with the Y pipe deal, it was just as bad as having the pipes dump out in front of the pass side tire with a 40 slowmaster.. Always seems when our trucks are stockish that we want loud, drive a bit more aggressive.. Once we get mods, we try to quiet them down some, don't drive quite as hard( at least myself) I vote keep your current, put a cut out on the truck..
Mar 15, 2011 | 01:23 PM
#12
TECH Fanatic
Joined: Feb 2010
Posts: 1,245
Likes: 0
From: el paso, tx
If you don't want to do a cut out and just stick to a si/so, go with the Dynomax Bullit. I have one on my 09 with stock manifolds, stock cats, and a 3.5" tip and it sounds mean. Nice deap rumble without too much rasp. It reall gets loud at WOT. It will sound way better than that flowmaster you have
Mar 15, 2011 | 02:23 PM
#13
Mar 15, 2011 | 02:43 PM
#14
I would only think you would be hassled for the noise. I have a SI-DO dumped Cherry Bomb and Bassani Mids with cats and I feel mine's pretty loud for what it is. I'm not sure why you want to go louder, but that's up to you. Long tubes and an ORY is about as loud as you can get on a stock 5.3.
Mar 18, 2011 | 01:43 PM
#20
No poss way you can carry on a convo on the on the phone. Radio maybe if you have decent system.. I have been there with the Y pipe deal, it was just as bad as having the pipes dump out in front of the pass side tire with a 40 slowmaster.. Always seems when our trucks are stockish that we want loud, drive a bit more aggressive.. Once we get mods, we try to quiet them down some, don't drive quite as hard( at least myself) I vote keep your current, put a cut out on the truck..
