ok... i currently have a 6.0 with a 408 kit..awating a f1 procharger.. looking to be around 800-1000 hp when its all said and done.. my question is what is the best fuel injector for this appliation. i wont have the charger for a while so they will need to be motor friendly for a while.. i was looking at 80lb semiens but what is the right style i need.. thanks for the help guys..

 

What fuel will you use?

 

93 octane.. and eventually the meth injection (dont know if that will make any difference)

 

1000cc injectors will work.

 

what model number is the injector your talking about... and what modifications are need to install them

 

72lb Delphi - MULTEC II GM Supercharged 4.8, 5.3, 6.0, 8.1 - Fuel Injectors MOD Sets - Siemens Injectors & Lucas Injectors - Racing Fuel Injector Sets - 11180US750 - Delphi 72lb

 

80pounders will do good.

 

The ones I linked are 96# at our fuel pressure. I'm shooting for the same power, and I'm going with these so I have a little wiggle room.

 

any modifaications needed to run them on the stock fuel rail for now...

 

They are modified truck injectors. I am running the 60# ones now, but I'm going with a bigger turbo this time around, so I will need more fuel.