I know this is a dumb ? but I cannot figure it out.

I was cleaning my t.b. and disconnected the maf and started the truck.
Now a SES light is showing. I have done this before but forgot how to reset it.
I have a camaro but it seems to be different when resetting the computer

 

For my truck, I just disconnected the battery for a few minutes, connected it back, and when i started the truck and drove for a little, the ses went away after 5 mins of driving.

 

He's right

 

turn the key to on and push the gas 3 times lol


i always just disc the Neg Batt cable for 10 mins than go back and start it up...let it idle for 3-5 mins than go drive recklessly

 

thanks i tried the neg batt cable but didn't drive it anywhere.
I also tried the turn key and push gas 4 times. lol the oil change light came on.
thanks for the help. I'm sure it will go off once i start driving again.

 

Pull ECM I and ECM B fuses under the hood with the key in the RUN position. Flip key off, then back on. Re-insert fuses, then you will hear the fuel pump kick on.