help {lifter retainers}
May 15, 2007 | 06:57 PM
#11
Originally Posted by ramsey rider
i thought every one was here to help each other so far every post iv put up iv either been made fun of or critisizwd for my lack of knowledge .thats why i joined this is to learn from professional based people .so please guys give me some slack im just learning
May 15, 2007 | 06:59 PM
#13
Here's a good writeup on a cam swap. It's in an f-body, so it will be a little different, but the internal engine work will be identical.
http://www.ls1howto.com/index.php?article=23
http://www.ls1howto.com/index.php?article=23
May 15, 2007 | 08:24 PM
#14
im doing heads too ,but how would i have changed cam without pulling heads .how would i have held the lifters up ,or would i have just have pulled them up and out of the way?thanks on the oil pump i thought i read on a posting in here that you did .but to be safe can anyone give me some help on it ,it looks like the pickup tube is going to be in the way and of course attached to the pump.{remember firstimer}thans for help.
May 15, 2007 | 10:17 PM
#15
in the link that thunder550 put up it says how to do it with some rods..on the cam retainer plate there are the two holes on both sides..you push long wooden or metal rods through there and they hold the lifters up
Thread
Thread Starter
Forum
Replies
Last Post
