i got the milled-ported-polished 243s///////////8.1 injectors and pushrods
so i need a cam any suggestions<><><><><><><><>
i want one with stock cam circles so i dont have to get new pushrods

 

206/218









:sarcasm:

 

what size motor and what type truck reg. cab - ext cab - crew cab / 2wd - 4wd / auto - manual

 

i got some 243's for my 5.3 just milled with a 224/224 hopefully it goes well

 

I believe all aftermarket cams require new pushrods. Plus, you mill the heads. After forking out all that cash, why not spend another 100 for pushrods?

And yes, you probably want to stay below 220/220 with a low lift with that lifted Avalanche. Torque is your friend.

 

tr220

 

4wd avalanche 5.3

i got them for 600 lolz i didnt have them milled some1 else did

 

no just some with different sized base circles or sumthin like that

 

http://store.summitracing.com/partde...5&autoview=sku

how about this one would it be good for my set up

 

I have had cams in both my trucks and a few of my friends also have them with stock pushrods. Never had a problem. 222/224/112