GM EFI NX KIT 4SALE!
#11
TECH Senior Member
iTrader: (1)
Join Date: Mar 2002
Location: Northwest Houston
Posts: 5,541
Likes: 0
Received 0 Likes
on
0 Posts
Re: GM EFI NX KIT 4SALE!
<img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
don't get mad because the "stagecoach" can fill with more women than your 2-seater!
remember, i used to have a 2-seater!!
hey, i tried to take the amber out of my headlights and couldn't do it. i feel dumb! <img border="0" title="" alt="[Sad]" src="gr_sad.gif" />
one of my headlights is all jacked up now. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
don't get mad because the "stagecoach" can fill with more women than your 2-seater!
remember, i used to have a 2-seater!!
hey, i tried to take the amber out of my headlights and couldn't do it. i feel dumb! <img border="0" title="" alt="[Sad]" src="gr_sad.gif" />
one of my headlights is all jacked up now. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />
#13
TECH Senior Member
iTrader: (1)
Join Date: Mar 2002
Location: Northwest Houston
Posts: 5,541
Likes: 0
Received 0 Likes
on
0 Posts
Re: GM EFI NX KIT 4SALE!
well i took out the headlight (drivers side)
took the two chrome clips off,
then took an exacto knife and cut the seal around the light. next i used a flat head screwdriver to bend the little plastic square holder things..
i bent all those back to where it wouldnt get in the way, and the SOB light wont pry loose...
do i need to cut the seal more or what?
took the two chrome clips off,
then took an exacto knife and cut the seal around the light. next i used a flat head screwdriver to bend the little plastic square holder things..
i bent all those back to where it wouldnt get in the way, and the SOB light wont pry loose...
do i need to cut the seal more or what?
#14
14 Second Truck Club
Join Date: Jun 2002
Location: cypress, tx
Posts: 594
Likes: 0
Received 0 Likes
on
0 Posts
Re: GM EFI NX KIT 4SALE!
i was surprised with how much of a seal was in there when i took mine out. i would cut the half with the amber reflector, separate, cut some more, separate, cut...etc. until i could pry the headlight open just enough for the reflector to jiggle out. if you're trying to pull the reflector out with your fingers, that's to hard. just open it up and let it fall out on it's own...took me all of 5 minutes.
#16
#17
Re: GM EFI NX KIT 4SALE!
Has to go NOW! I just recieved a phone call saying my truck is getting repoed Monday so I have to sell the kit NOW! E-MAIL me any offers
BADASS2001CHEVY@AOL.COM
BADASS2001CHEVY@AOL.COM
Thread
Thread Starter
Forum
Replies
Last Post
5.3lSilverado
GM Engine & Exhaust Performance
25
08-29-2016 12:48 AM
slowlsx
GM Parts Classifieds
1
08-13-2015 08:28 PM