What's up guys? I'll be doing a few upgrades in the near future and thought i'd get ya'lls opinions and any advice that ya'll are willing to give me!

Truck Mods right now :
1997 5.7 Vortec
Whipple SuperCharger
36# wynjammer spider injectors
255 walbro fuel pump
2 bar map
Long Tubes
True duals / no cats / X-Pipe into 2 40 series flows
Accel Coil
TR6 Plugs (.35)
0411 Pcm ( BlackBear Tune ) will datalog after all this
3:42 Posi rearend

Now for the future mod list:
LS6 Beehive springs or 26918
Comp retainers - 787-16
1.6 roller tip rockers - Comp Cams 1418-16
Comp Cam Recommended - 08-303-8 (288/315, Lift .520/.540) Open to options
Replace timing Chain
Transgo HD2 Transmission Kit

What do you guys think?

 

What psi fuel pressure are you running? I don't think 36lb. Injectors is going to be enough.

 

With that cam and that computer your truck is not going to want to idle. Would drive like crap other than wot

 

+1 on the cam... I would double check with comp.. I'm no cam expert but on a boosted application the lobe separation is usually higher also. I thought 118+. Again, I'm no expert, maybe for a full race application it's different.

 

I need to run a test to see where it's at.. Yea i wasn't sure what i could get out of the 36lb injectors.

 

I'll get with comp again and see what they say