GM Engine & Exhaust Performance EFI | GEN I/GEN II/GEN III/GEN IV Engines |Small Block | Big Block |

Dead battery, now truck won't stay started -help

Thread Tools
 
Search this Thread
 
Old Feb 26, 2005 | 04:09 PM
  #1  
XLR8NSS's Avatar
Thread Starter
Adkoonerstrator
iTrader: (4)
 
Joined: Nov 2001
Posts: 21,436
Likes: 3
From: Deep in the seedy underworld of Koonerville
Default Dead battery, now truck won't stay started -help

Well, I've tried to search and it's messed up so I need some help.

I replaced my VSC last night with a Nelson Fan Harness so I can control my electric fans with the computer. I got everything wired up and find out the battery is COMPLETELY dead. So today I go and get a battery, put it in, program the computer for the fans, hit the key and it starts right up. The thing is that it dies like 2 seconds later.

I checked the trouble codes in the computer and it says something about the theft deterrent system and fuel shutoff.

How do I reset this bastard? I tried clearing the trouble codes but, they come right back at the hit of the key.

Thanks

BTW, it'll keep starting right up no problem, just won't stay started for more than 2 seconds or so. I'm assuming the fuel shutoff deal is not turning the pump on.
Reply
Old Feb 26, 2005 | 04:20 PM
  #2  
therock's Avatar
TECH Fanatic
20 Year Member
Loved
Liked
Community Favorite
iTrader: (2)
 
Joined: Mar 2004
Posts: 1,817
Likes: 58
From: 30 Miles North of Atlanta
Default Go To Nelsons Site........

and read and perform the security code reset procedure.
Reply
Old Feb 26, 2005 | 04:23 PM
  #3  
XLR8NSS's Avatar
Thread Starter
Adkoonerstrator
iTrader: (4)
 
Joined: Nov 2001
Posts: 21,436
Likes: 3
From: Deep in the seedy underworld of Koonerville
Default

Going now. A link woulda been nice.

Thanks BTW.
Reply
Old Feb 26, 2005 | 04:36 PM
  #4  
one03sierra's Avatar
Formerly one92rs
iTrader: (1)
 
Joined: Apr 2003
Posts: 4,205
Likes: 1
From: league city texas
Talking

in my sig is a link sir.

here it is http://www.nelsonperformance.com/faqs/passkey.htm
Reply
Old Feb 26, 2005 | 06:20 PM
  #5  
XLR8NSS's Avatar
Thread Starter
Adkoonerstrator
iTrader: (4)
 
Joined: Nov 2001
Posts: 21,436
Likes: 3
From: Deep in the seedy underworld of Koonerville
Default

Well, I never completed the passkey procedure or even actually started it. The truck fired right up once I went back outside. I'm going to investigate tomorrow. The truck not starting might have had something to do with Flashscan after flashing a new file to the PCM. It works now and the computer is controlling the fans....SWEET!!
Reply
Old Feb 26, 2005 | 06:32 PM
  #6  
BlownChevy's Avatar
blownerator
25 Year Member
iTrader: (20)
 
Joined: Mar 1986
Posts: 18,749
Likes: 8
From: Chatsworth, CA
Default

VATS has struck again.
Reply
Old Feb 26, 2005 | 06:35 PM
  #7  
XLR8NSS's Avatar
Thread Starter
Adkoonerstrator
iTrader: (4)
 
Joined: Nov 2001
Posts: 21,436
Likes: 3
From: Deep in the seedy underworld of Koonerville
Default

Originally Posted by BlownChevy
VATS has struck again.
Reply
Old Feb 26, 2005 | 06:37 PM
  #8  
Flyer's Avatar
TECH Senior Member
iTrader: (1)
 
Joined: Jan 2003
Posts: 9,342
Likes: 0
From: Armpit of East TX
Default

Looks like ya'll got this one under control here.
Reply
Old Feb 26, 2005 | 06:38 PM
  #9  
BlownChevy's Avatar
blownerator
25 Year Member
iTrader: (20)
 
Joined: Mar 1986
Posts: 18,749
Likes: 8
From: Chatsworth, CA
Default

Originally Posted by Flyer
Looks like ya'll got this one under control here.
Reply
Old Feb 26, 2005 | 06:43 PM
  #10  
XLR8NSS's Avatar
Thread Starter
Adkoonerstrator
iTrader: (4)
 
Joined: Nov 2001
Posts: 21,436
Likes: 3
From: Deep in the seedy underworld of Koonerville
Default

Originally Posted by Flyer
Looks like ya'll got this one under control here.
Yeah, after one FULL day I finally got it working.

First I couldn't get the stupid grey cover off the PCM clip. I finally get it off and get the harness wired up and the battery is completely, absolutely, TOTALLY DEAD. It's late so I just wait till today to get a new battery. I get it replaced and the truck won't stay started. Talk about irritated. I come inside to try and find out what I need to do to reset the Theft deal and the search feature is NOT WORKING. So I have to look like a newb and ask for help. I print the passkey thing out, go back outside and the truck starts right up.

It's been an experience.....Thank god it's over.
Reply



All times are GMT -5. The time now is 02:54 AM.