GM Engine & Exhaust Performance EFI | GEN I/GEN II/GEN III/GEN IV Engines |Small Block | Big Block |

4.8 guys

Thread Tools
 
Search this Thread
 
Old Sep 15, 2006 | 01:35 PM
  #1  
Nikon02's Avatar
Thread Starter
TECH Apprentice
 
Joined: Dec 2005
Posts: 365
Likes: 0
Default 4.8 guys

Anyone with a 4.8 want to let us know what you have for mods (on a 4.8) and power numbers you have your setup and track times, and dont forget to let us know your truck style.
Reply
Old Sep 15, 2006 | 01:49 PM
  #2  
CHEVRACER83's Avatar
TECH Senior Member
 
Joined: Jul 2006
Posts: 7,023
Likes: 0
From: Somewhere around -199C
Default

I have a 2006 rcsb

Exterior mods.
- Custom front bumper by Honda (hit an accord)
at least i can laugh at it now

- scratched drivers side wheelwell on pole.

Other mods:
none....

Track times:

Slow @ Slow m.p.h.

sorry for whoevers sig i stole that from... but had to use it.

**** On a serious note... I hear these 4.8s can be pretty fast... I beat up on a CC "big horn edition" hemi the other day... and im completely 100% stock.

So i guess the possibility is there... I just dont have the $$
Reply
Old Sep 15, 2006 | 01:52 PM
  #3  
kbracing96's Avatar
TECH Senior Member
iTrader: (26)
 
Joined: Jul 2004
Posts: 9,485
Likes: 31
From: Oakland, OR
Default

See sig for mods, 400rwhp, 13.8 @ 98mph
Reply
Old Sep 15, 2006 | 01:53 PM
  #4  
j.whitten's Avatar
Staging Lane
 
Joined: Jun 2006
Posts: 50
Likes: 0
From: Houston/Indianapolis
Default

04 4.8 maual scsb

intercooled radix @ 10.5 psi
edelbrock shorty headers
K&N CAI
160 degree t-stat
10" electric fan on the heat exchanger
msd wires
bosh platinum 2 plugs
spec stage 3 clutch
26x11.5 r 17 et streets @ 15 psi

dyno chart is included

379hp and 393tq


BTW it hit the rev limiter at 107 or so because the tires were smaller than factory and it wasn't adjusted for them yet.

they 348/359 is @ 7.5 psi


Fastest track time to date with open rear end is a

R/T .496
60' 2.031
330' 5.778
1/8 8.806
MPH 82.41
1000' 11.455
1/4 13.489
MPH 102.23

I now have added timing, installed electric fans, and put in my powertrax.
with a good 60' I am hoping to see low 13's

Last edited by j.whitten; Sep 15, 2006 at 02:26 PM.
Reply
Old Sep 15, 2006 | 01:57 PM
  #5  
CHEVRACER83's Avatar
TECH Senior Member
 
Joined: Jul 2006
Posts: 7,023
Likes: 0
From: Somewhere around -199C
Default

Originally Posted by kbracing96
See sig for mods, 400rwhp, 13.8 @ 98mph

I love your sig..... i laugh my *** off every time i read it...... Now i need one
Reply
Old Sep 15, 2006 | 02:17 PM
  #6  
kbracing96's Avatar
TECH Senior Member
iTrader: (26)
 
Joined: Jul 2004
Posts: 9,485
Likes: 31
From: Oakland, OR
Default

Originally Posted by CHEVRACER83
I love your sig..... i laugh my *** off every time i read it...... Now i need one
Thanks!
Reply
Old Sep 15, 2006 | 03:48 PM
  #7  
shandy294's Avatar
TECH Fanatic
 
Joined: May 2004
Posts: 1,087
Likes: 0
From: Cibolo Tx
Default

Truck in sig: 16.12 @ 87.38

temp: approx 65
Alt: approx 750'
humi: " " 35%
Reply
Old Sep 15, 2006 | 04:03 PM
  #8  
Grumpy5.3's Avatar
TECH Fanatic
iTrader: (14)
 
Joined: Nov 2005
Posts: 1,014
Likes: 0
From: South Georgia
Default

04 rcsb, made 296 hp on the dyno with mods in sig!!!
no track times yet...
Reply
Old Sep 15, 2006 | 05:48 PM
  #9  
shandy294's Avatar
TECH Fanatic
 
Joined: May 2004
Posts: 1,087
Likes: 0
From: Cibolo Tx
Default

Are you Bill Jenkins?
Reply
Old Sep 15, 2006 | 06:09 PM
  #10  
redLS1rado's Avatar
On The Tree
iTrader: (1)
 
Joined: Feb 2005
Posts: 186
Likes: 0
From: Houston TX
Default

According to my interceprtor scan gauge my HP is right at 270 with mods in sig. No track times yet.
Reply



All times are GMT -5. The time now is 12:43 PM.