GM Engine & Exhaust Performance EFI | GEN I/GEN II/GEN III/GEN IV Engines |Small Block | Big Block |

226 226 is in

Thread Tools
 
Search this Thread
 
Old Mar 11, 2006 | 08:51 PM
  #1  
v8
Thread Starter
17,16,15,14,13,12,11 Drvr
iTrader: (10)
 
Joined: Aug 2003
Posts: 6,713
Likes: 0
From: Mont Belvieu, Texas
Default 226 226 is in

Put the cam in and removed the springs to put new valve stem seal on and back together, than took it for a spin, times will tell after the track tomorrow.
Reply
Old Mar 11, 2006 | 09:15 PM
  #2  
Yelo's Avatar
TECH Addict
 
Joined: Feb 2003
Posts: 2,864
Likes: 1
From: Geneseo, NY
Default

Sweet !!!, let us know how that 226 runs !!
Reply
Old Mar 11, 2006 | 09:32 PM
  #3  
ap2002's Avatar
TECH Senior Member
20 Year Member
iTrader: (8)
 
Joined: Sep 2004
Posts: 6,411
Likes: 0
From: Houston, Texas
Default

cool kevin, so I guess it is running good with that tune huh?

I'll see you tomorrow at the track!
what time are you planning on getting there??
Reply
Old Mar 11, 2006 | 09:34 PM
  #4  
v8
Thread Starter
17,16,15,14,13,12,11 Drvr
iTrader: (10)
 
Joined: Aug 2003
Posts: 6,713
Likes: 0
From: Mont Belvieu, Texas
Default

right now its hard to say, the tune is good to go from the other cam, it brought my LT fuel trims to 0.0 at idle and -1.6 at cruising wot 0.00 can't beat that. 02's are reading about 875 and 13.0 on the a/f ratio
Reply
Old Mar 11, 2006 | 09:35 PM
  #5  
v8
Thread Starter
17,16,15,14,13,12,11 Drvr
iTrader: (10)
 
Joined: Aug 2003
Posts: 6,713
Likes: 0
From: Mont Belvieu, Texas
Default

around 5pm i think or close to it.
Reply
Old Mar 11, 2006 | 10:19 PM
  #6  
1slow01Z71's Avatar
Tin Foil Hat Wearin' Fool
iTrader: (36)
 
Joined: Oct 2004
Posts: 23,204
Likes: 4
From: Austin, TX
Default

Why didnt you change the seals out when you out the springs on like a month ago?
Reply
Old Mar 11, 2006 | 10:34 PM
  #7  
Sport Side's Avatar
TECH Veteran
iTrader: (6)
 
Joined: Nov 2003
Posts: 4,397
Likes: 0
From: Tallahassee, FL
Default

I'm anxious to see how it performs.
Reply
Old Mar 11, 2006 | 11:15 PM
  #8  
v8
Thread Starter
17,16,15,14,13,12,11 Drvr
iTrader: (10)
 
Joined: Aug 2003
Posts: 6,713
Likes: 0
From: Mont Belvieu, Texas
Default

the air compressor was messing up, so all i had time to do then was get the springs on. No matter there on now.
Reply
Old Mar 11, 2006 | 11:15 PM
  #9  
v8
Thread Starter
17,16,15,14,13,12,11 Drvr
iTrader: (10)
 
Joined: Aug 2003
Posts: 6,713
Likes: 0
From: Mont Belvieu, Texas
Default

Originally Posted by Sport Side
I'm anxious to see how it performs.
so am I!
Reply
Old Mar 11, 2006 | 11:48 PM
  #10  
La Riddler's Avatar
TECH Apprentice
iTrader: (1)
 
Joined: Sep 2005
Posts: 325
Likes: 0
From: Mission, Tx.
Default

good luck Kevin, How different does it feel
with this cam? Do you feel it stronger?
Reply



All times are GMT -5. The time now is 01:09 PM.