sources for 14" brake rotors?
#46
Thanks for the heads up, I am doing the z06 brake swap on mine. Glad to know before i dropped a 1000 bucks on baers that they dont last. I emailed ssbc so waiting for a reply from them. I was thinking about buying coleman rotors and going that route but jesus after i make the hats the cost is the same if not more.
#47
Sorry about that 1/8, it should have been 1/16...must have gotten too many numbers floating around in my head at that time.
My baer rotors are worn, but the very outer edge is still original thickness. In other words there is a lip at the outer edge, and then the wear begins about 1/8" below that.
SSBC rotors appear to be about half of baers in terms of cost.
My baer rotors are worn, but the very outer edge is still original thickness. In other words there is a lip at the outer edge, and then the wear begins about 1/8" below that.
SSBC rotors appear to be about half of baers in terms of cost.
#48
It's not like that was posted on page 1 or anything.
You can call me at 716-407-0152 to place the order or you can just send
me the credit card information and address by email.
Bob Warrington
Sales Representative
Stainless Steel Brakes Corp.
11470 Main Road
Clarence NY 14031
Tel: 1-800-448-7722 x-152
B.Warrington@ssbrakes.com
me the credit card information and address by email.
Bob Warrington
Sales Representative
Stainless Steel Brakes Corp.
11470 Main Road
Clarence NY 14031
Tel: 1-800-448-7722 x-152
B.Warrington@ssbrakes.com