Performabuilt level 3 60e
#11
Joined: Apr 2004
Posts: 16,820
Likes: 2
From: In a van DOWN BY THE RIVER
Was the ET streets yah no with the 3 lil lines cut into them.. Tried 13-14-16-20 psi all the same get out about 30 ft and up in smoke, like as soon as the vert locked full(3200) had to let out, this is with cal-tracs
#12
I've never tried the old et streets but there are a lot of big HP cars running the ET street radials with success.
#14
Joined: Apr 2004
Posts: 16,820
Likes: 2
From: In a van DOWN BY THE RIVER
Well they are out, next set is gona be Full slicks, Hoosiers..
No Russ I have not
I have heard from a few guys that are into racing big time, that hoosiers work better on heavy cars..
No Russ I have not
I have heard from a few guys that are into racing big time, that hoosiers work better on heavy cars..
#15
#16
Joined: Apr 2004
Posts: 16,820
Likes: 2
From: In a van DOWN BY THE RIVER
#17
I did hear about the May 7th meet but that's mother's day weekend and I might be out of town. If I'm hear I might try to ride down.
#20
not the first...not the last either. bluecajun has been 11.70's i think, ive been 11.80's, skeets been 11.80, wheatley will get his 11 second pass as soon as he gets that g80 outa there in his crewcab. were all going to push it harder too
last time out i went progressive on the 100 shot for 1.6 seconds until i had the full hit... if i go tonight im going all out 100 out of the hole. my 60' from motor to nitrous didnt even change spraying progressive so hopefully tonight ill get some low 1.6x 60's.

last time out i went progressive on the 100 shot for 1.6 seconds until i had the full hit... if i go tonight im going all out 100 out of the hole. my 60' from motor to nitrous didnt even change spraying progressive so hopefully tonight ill get some low 1.6x 60's.







