ZZebes

iTrader: (10)

Anyone have a parts list for what i take to change the tranny lines to A/N mine are starting to rub through and i am worried about a fire

silver-mod-o

iTrader: (15)

https://ls1tech.com/forums/showthrea...549&highlight=

Here's how I did mine...

Bill Reid

iTrader: (14)

2 ea. 1/4 NPT to 6AN male adaptor - Earl's 981606ERL (these screw into the tranny using teflon tape)
2 ea. 90 degree hose ends - Earl's 809106ERL

Measure out how many hose you'll need... I recommend Earls Proflex 350

I don't know what adaptors you'll need at your tranny cooler as you have an aftermarket one, right? So you'll need to figure that out.

Obviously there are other brands of hose fittings and adaptors but these are what I used... just giving you an idea...

Bill

1slow01Z71

iTrader: (36)

Ill sell you my whole setup to plug it directly into your cooler to the trans housing including the fittings that actually go into the trans for 120, you will find once you price everything out it will be around 160-180 just in fittings and lines then putting them together etc. Give me a call if you are interested.

ZZebes

iTrader: (10)

I'll give you a holler later today when i get off work