Just trying to figure out the....
Nov 29, 2010 | 02:40 PM
#1
Thread Starter
Registered User
Joined: Nov 2010
Posts: 6
Likes: 0
Just trying to figure out the....
..ball bearings of this site!
I am very interested in lowering my 06' 4dr pick up, and am curious to know what you all think of certain brands that are avail. as of now I have a CTS 4" lift kit that I will be removing (Obviously) and would like something more driver friendly, closer to the ground, and just a clean river tow vehicle!
I dont want to drag the under carriage across everything in the road, just something that will look nice with a set of 22'' billet whatevers with a decent ride! We rarely use the truck for anything other than river trips and short bursts to home depot anymore!
Thanks in advance
BTW- Pics of lowering sizes would help in a decision of drop size to go with!
Thanks again!
TRG
I am very interested in lowering my 06' 4dr pick up, and am curious to know what you all think of certain brands that are avail. as of now I have a CTS 4" lift kit that I will be removing (Obviously) and would like something more driver friendly, closer to the ground, and just a clean river tow vehicle!
I dont want to drag the under carriage across everything in the road, just something that will look nice with a set of 22'' billet whatevers with a decent ride! We rarely use the truck for anything other than river trips and short bursts to home depot anymore!
Thanks in advance
BTW- Pics of lowering sizes would help in a decision of drop size to go with!
Thanks again!
TRG
Nov 29, 2010 | 07:06 PM
#3
Thread Starter
Registered User
Joined: Nov 2010
Posts: 6
Likes: 0
10 minutes from the Fairplex in Pomona.
My cousin is interested in the suspension, but if I dont see chee$e from him, Im not selling it to him!
I will know more later this week.
31 views and no info to offer?
Look guys, I really dont want a shitty lowering system under my pick up, any and all info would be greatly appreciated!
Thanks
TRG
My cousin is interested in the suspension, but if I dont see chee$e from him, Im not selling it to him!
I will know more later this week.
31 views and no info to offer?
Look guys, I really dont want a shitty lowering system under my pick up, any and all info would be greatly appreciated!
Thanks
TRG
Nov 30, 2010 | 03:20 PM
#5
if you don't wanna scrape everywhere, just do a 2/4 kit. McGaughy's is what I have & what a lot of others have. The drop companies are: mcgaughy's, belltech, & djm. I think Norcal TBSS is a sponsor here & he sells belltech & djm. Do you have springs or torsion bar suspension up front? 2wd could be either, 4wd will always be torsion bar. If you have torsion bars, you can just do the drop keys up front & shackles in the rear/remove blocks. I called this the poor man's drop & it is what's in the pics below.
Here's my truck with a 2/4-5ish with 275/55/20s
Here's my truck with a 2/4-5ish with 275/55/20s
Last edited by badz24s; Nov 30, 2010 at 03:32 PM.
Dec 1, 2010 | 01:39 PM
#6
Thread Starter
Registered User
Joined: Nov 2010
Posts: 6
Likes: 0
Im not gonna lie to you, I like the way your P/U looks! thats just about all I want, baybe just a tad lower, but essentially thats where I wanna be!
Here is where mine sits now, bought the P/U from my old man, he went latest model and offered it up to me at a steal, now I just need to make it mine!
Sellin the wheels, Shell, and lift (Should know by the weekend on the lift!)
also the Amp research drop down steps if anyone is interested.
Poor pic I know but here it is...
Here is where mine sits now, bought the P/U from my old man, he went latest model and offered it up to me at a steal, now I just need to make it mine!
Sellin the wheels, Shell, and lift (Should know by the weekend on the lift!)
also the Amp research drop down steps if anyone is interested.
Poor pic I know but here it is...
Dec 1, 2010 | 04:50 PM
#7
if you don't wanna scrape everywhere, just do a 2/4 kit. McGaughy's is what I have & what a lot of others have. The drop companies are: mcgaughy's, belltech, & djm. I think Norcal TBSS is a sponsor here & he sells belltech & djm. Do you have springs or torsion bar suspension up front? 2wd could be either, 4wd will always be torsion bar. If you have torsion bars, you can just do the drop keys up front & shackles in the rear/remove blocks. I called this the poor man's drop & it is what's in the pics below.
Is it 4 wheel drive?
Trending Topics
Dec 1, 2010 | 09:04 PM
#9
Im not gonna lie to you, I like the way your P/U looks! thats just about all I want, baybe just a tad lower, but essentially thats where I wanna be!
Here is where mine sits now, bought the P/U from my old man, he went latest model and offered it up to me at a steal, now I just need to make it mine!
Sellin the wheels, Shell, and lift (Should know by the weekend on the lift!)
also the Amp research drop down steps if anyone is interested.
Poor pic I know but here it is...
Here is where mine sits now, bought the P/U from my old man, he went latest model and offered it up to me at a steal, now I just need to make it mine!
Sellin the wheels, Shell, and lift (Should know by the weekend on the lift!)
also the Amp research drop down steps if anyone is interested.
Poor pic I know but here it is...