Here we go JakesPerformance 4l80E/Transbrake
#1
Here we go JakesPerformance 4l80E/Transbrake
Well after a big disappointment from CKperformance, i'm going to give Jakesperformance a shot. There a sponsor over on LS1tech so I guess they on this site to? I also thought about FLT, but i'm interested in Jakes trans-brake and it's a free upgrade right now. From reading many reviews over on LS1, he seems to be known to build a mean 4l80e.
Anyways, after talking with a Jake a good bit, he thinks a level 2.5 build is best for me as I told him I want some head room over my current power. It takes the level II rated/warrantied at 750hp and adds a billet input and billet rollerized forward hub.
Well see, he said about 2 weeks on build time. I'll keep you guys posted on the swap/performance gains.
Anyways, after talking with a Jake a good bit, he thinks a level 2.5 build is best for me as I told him I want some head room over my current power. It takes the level II rated/warrantied at 750hp and adds a billet input and billet rollerized forward hub.
Well see, he said about 2 weeks on build time. I'll keep you guys posted on the swap/performance gains.
#6
MASS seller approved
iTrader: (154)
Join Date: Apr 2006
Location: OKLAHOMA
Posts: 1,925
Likes: 0
Received 0 Likes
on
0 Posts
What about all the money u wasted on the CK? not gonna ask for a refund? Or atleast have them rebuild it and then sell it? I'm so scared to buy a tranny bc I know I'm gonna drive it like I stole it but if it's supposed to be built for high performance it should handle it for atleast 10-20k miles if it's your DD as well
Trending Topics
#9
TECH Junkie
iTrader: (9)
I would contact CKPERFORMANCE, and tell them what happened. I bet he can beef it up for you to hold. It was a few years ago, but I could have sworn that they had an 80E that was good for 2000+HP. If you send that to another company, they will just give you the core value. CKPERFORMANCE will at least help you out with it I would assume.
#10
My issue with CK is it took over two months to get it to me the first time. Was built with the wrong valve body, and took nearly 3 months to get the correct valve body.It was built to hold 900HP, but is slipping with well less then that.
Last edited by foose04; 04-16-2011 at 09:04 PM.