GM Drivetrain & Suspension Chassis | Transmission| Driveshaft | Gears/Rear End/Differential | Traction Aids

got my level 7!!

Thread Tools
 
Search this Thread
 
Old Jul 26, 2009 | 02:20 PM
  #21  
fastnblu's Avatar
TECH Senior Member
iTrader: (2)
 
Joined: Mar 2008
Posts: 5,718
Likes: 1
Default

Originally Posted by Truckshop
i was just posting what daryn was talking about. i have never met casey. i personally believe that the only thing that can break a tranny is your right foot. any tranny is capable breaking. i hope the flt level 7 holds up well. god knows we need a 4l60e that will hold up. i dont want to do an 80e swap. i also agree with your last statement. i don't know the whole story between casey and flt. there are 3 side to every story so who knows.
I hear ya. I too don't want a 80E unless that is my only recourse if I ever reach that level.
3 sides to every story? I heard that in a blues song.

Originally Posted by 4.8T
the output shafts in the lvl 4 and 5's are stock. i didn't read the thread but maybe it was just a bad shaft. i went with the lvl 7 for just this reason, to get rid of the stock shafts.
I thought the Level 5 uses billet on just 1 of the shafts. It does, it's an optional upgrade. BTW, when I stated other factors (meaning my worn G80 rearend taking out my '89's built tranny), the input shaft was what destroyed the whole trans when it snapped in 1/2 & wedged in tranny.

4.8T, I don't need to see vid, but since u offered. 1 inside cabin plus whatever u like. I also like vids.

Last edited by fastnblu; Jul 26, 2009 at 02:29 PM. Reason: Billet o/p shaft a Level 5 upgrade.
Reply
Old Jul 26, 2009 | 02:40 PM
  #22  
TURBHOE's Avatar
Thread Starter
12 Second Truck Club
iTrader: (4)
 
Joined: Nov 2004
Posts: 6,318
Likes: 2
From: Jacksonville FL.
Default

it may not be today. its raining it *** off right now. but if it stops i'll hook it up. i like videos too. lol
Reply
Old Jul 26, 2009 | 06:09 PM
  #23  
TURBHOE's Avatar
Thread Starter
12 Second Truck Club
iTrader: (4)
 
Joined: Nov 2004
Posts: 6,318
Likes: 2
From: Jacksonville FL.
Default

too wet for a real video but here is one with just light cruise from a stop light. steady foot.

http://videos.streetfire.net/video/e...new_697596.htm
Reply
Old Jul 26, 2009 | 07:37 PM
  #24  
616 of 933's Avatar
Staging Lane
iTrader: (1)
 
Joined: Jul 2009
Posts: 78
Likes: 0
From: HELL
Default

DId not realize they make a Lvl 7 I check the site. I like the Lvl 5 80 if my stocker goes out
Reply
Old Jul 27, 2009 | 08:43 PM
  #25  
TURBHOE's Avatar
Thread Starter
12 Second Truck Club
iTrader: (4)
 
Joined: Nov 2004
Posts: 6,318
Likes: 2
From: Jacksonville FL.
Default

looks like track won't be available for midnight drags until aug 7th. its not even open for daytime use until 8th aug. ihra jr drags this weekend. i will still get a wot video soon but no track time until then.
Reply
Old Jul 27, 2009 | 08:55 PM
  #26  
Jeteys5.3's Avatar
TECH Fanatic
iTrader: (4)
 
Joined: Aug 2008
Posts: 1,335
Likes: 0
From: Virginia
Default

^how far are you from mason dixon dragway?
Reply
Old Jul 27, 2009 | 09:19 PM
  #27  
TURBHOE's Avatar
Thread Starter
12 Second Truck Club
iTrader: (4)
 
Joined: Nov 2004
Posts: 6,318
Likes: 2
From: Jacksonville FL.
Default

where is it? got a website or address?
Reply
Old Jul 27, 2009 | 09:20 PM
  #28  
Jeteys5.3's Avatar
TECH Fanatic
iTrader: (4)
 
Joined: Aug 2008
Posts: 1,335
Likes: 0
From: Virginia
Default

http://www.masondixondragway.com/

im going friday probably
Reply
Old Jul 27, 2009 | 09:26 PM
  #29  
TURBHOE's Avatar
Thread Starter
12 Second Truck Club
iTrader: (4)
 
Joined: Nov 2004
Posts: 6,318
Likes: 2
From: Jacksonville FL.
Default

2 hours 45mins looks like
Reply
Old Jul 28, 2009 | 02:20 PM
  #30  
skyhighsami's Avatar
no title here
iTrader: (8)
 
Joined: Jun 2007
Posts: 2,352
Likes: 3
From: Montgomery, AL
Default

Did you get the SSS tcase in? I remember you saying it needed one because the weight transfer at the track was causing an issue. Just curious if it helped as much as you were hoping.
Reply



All times are GMT -5. The time now is 08:10 PM.