FLT's March Madness Shipping Special
Mar 5, 2008 | 07:22 PM
#1
Thread Starter
FormerVendor
iTrader: (1)
Joined: Sep 2005
Posts: 6,617
Likes: 1
From: Wood Dale, Illinois
FLT's March Madness Shipping Special
Back by popular demand!! Free shipping on all FLT transmission orders for the month of March. This is for inter-continental U.S. only!!
https://www.performancetrucks.net/fo...d.php?t=413213
https://www.performancetrucks.net/fo...d.php?t=413213
Mar 5, 2008 | 09:59 PM
#2
Everyone, jump on this deal. i just got mine today! I cant wait to get it installed! Chuck and Vince are great guys and have been willing to go the extra mile to keep me updated on the status of everything as well as answering all my questions. You won't be disappointed! Thanks again FLT!
Trending Topics
Mar 13, 2008 | 08:06 AM
#8
Thread Starter
FormerVendor
iTrader: (1)
Joined: Sep 2005
Posts: 6,617
Likes: 1
From: Wood Dale, Illinois
These are all pictures as to exactly what our transmissions look like when you receive them. This trans is one that was built for a fbody but the pictures show the quality that you will receive. To see more photo's click the link in my sig.
As you can see the unit comes complete ready to be installed. The only things that need to be transferred are any brackets, mounts and the speed sensor.
Here is a picture of a LS1 300mm bell, 300mm pump/stator and 300mm input shaft. Our units to come with the bell installed for you.
As you can see in these photo's of the transmissions, they are built like new right down to the oil pan. Every piece is addressed on every unit we build. This is just the way I believe it should be done.
This is where we put our ID mark. It includes the date the trans was built, the builder and what level it is. We have been doing this for the past couple of years.
Here is a photo of the transmissions cooler fittings. We install these for you before the transmission leaves FLT. They are a push in style fitting. Which means all you need to do is to push the lines into them until they snap in place. Always make sure that the clips are on the fittings before doing this. The bottom line is the cooler pressure out to cooler and the top line is the return from the cooler.
This is a picture of the 4th servo cover. This is where the 2nd and 4th servos are located on the transmission. The servos are what is used to apply the band in 2nd and 4th gears.
This is a picture of the transmission case connector for the 4l60e.
All 2wd Drive units come with the correct tail housing. This is a picture of a F-Body tail.
All units come with the correct linkage. Either new or like new.
Couple pictures of the Dyno.
This last picture is one that is on our machine that I find funny. Enjoy Vince
As you can see the unit comes complete ready to be installed. The only things that need to be transferred are any brackets, mounts and the speed sensor.
Here is a picture of a LS1 300mm bell, 300mm pump/stator and 300mm input shaft. Our units to come with the bell installed for you.
As you can see in these photo's of the transmissions, they are built like new right down to the oil pan. Every piece is addressed on every unit we build. This is just the way I believe it should be done.
This is where we put our ID mark. It includes the date the trans was built, the builder and what level it is. We have been doing this for the past couple of years.
Here is a photo of the transmissions cooler fittings. We install these for you before the transmission leaves FLT. They are a push in style fitting. Which means all you need to do is to push the lines into them until they snap in place. Always make sure that the clips are on the fittings before doing this. The bottom line is the cooler pressure out to cooler and the top line is the return from the cooler.
This is a picture of the 4th servo cover. This is where the 2nd and 4th servos are located on the transmission. The servos are what is used to apply the band in 2nd and 4th gears.
This is a picture of the transmission case connector for the 4l60e.
All 2wd Drive units come with the correct tail housing. This is a picture of a F-Body tail.
All units come with the correct linkage. Either new or like new.
Couple pictures of the Dyno.
This last picture is one that is on our machine that I find funny. Enjoy Vince
