Would like some feedback on a good drop 4 a 06 single cab chev, what brand and how low, i was thinkin 4''6''

 

4/6 your gonna need a notch. I had a 3/5 and needed one. If I would have put one in, my ground force kit would have rode better. The front was fine, but on dips or hauling anything you are riding on the bumpstops. I say a 3/4 unless you get a notch, if so then go lower in the back. With the 3/5 drop, it would scrap just about everywhere, why do they make those curbs so high.LOL. I scraped real hard on a dip one time, sparks flew. After raising the truck back up, there were several bent or scraped things under the truck. Now I just have 2" shackles on the rear and enjoy the ride much better, but it looked better lowered.

 

4/6 all the way I love it!I am running 275/40/20. it is a DJM lower control arm in the front with stock shocks and flip kit in the rear with drop shocks

 

Looks good.

 

4/7 here. DJM 4" arms, DJM flipkit, and shackles. DJM shocks up front, air shocks in back. Its my work truck and it gets driven in the ranch, just have to watch the ground clearance.