where can i get a drive shaft lube for a 2002 silverado ecsb. and by having a carrier bearing's would i need two drive shaft lube.

 

Not for sure what you talking about "driveshaft lube". Gease is used for u-joints, and the intermediate shaft slip joint. Grease is available from Autozone, Oreilly's, PepBoys, NAPA, CarQuest, or any autoparts store, hardwarestore.

If this is trick question and you want a dirty answer then go over to some RICER FORUM.

 

Yes regular old wheel bearing grease is just fine.

 

i meant drive shaft loop it's used to keep the drive shaft from the tranny to hit the ground and strike into the ground. it bolts on 12 inches from the tranny towards the back. cuz the track i go to requires it for having drag slicks. and no not talking about grease i know that. LOL

 

Summit has them, but no-one that I know of is making them for late model G.M trucks, most people have them custom made.