GM Drivetrain & Suspension Chassis | Transmission| Driveshaft | Gears/Rear End/Differential | Traction Aids

corvette servo

Thread Tools
 
Search this Thread
 
Old Nov 5, 2006 | 09:01 PM
  #1  
slownlow4.8's Avatar
Thread Starter
TECH Resident
iTrader: (5)
 
Joined: Sep 2006
Posts: 877
Likes: 0
From: maryland
Default corvette servo

where can i buy a corvette servo, how much do they cost and what do i to install it?
Reply
Old Nov 5, 2006 | 09:13 PM
  #2  
slownlow4.8's Avatar
Thread Starter
TECH Resident
iTrader: (5)
 
Joined: Sep 2006
Posts: 877
Likes: 0
From: maryland
Default

is Monster Transmission & Performance a good place to buy from?
Reply
Old Nov 5, 2006 | 09:16 PM
  #3  
TouchOfEvil04's Avatar
TECH Junkie
iTrader: (13)
 
Joined: Apr 2006
Posts: 3,312
Likes: 0
From: Walker
Default

Yea not bad,You can get one from Ebay i belive Oregantransmission is the name.Alot of people get stuff from him and never ahve any problems.
Reply
Old Nov 5, 2006 | 09:18 PM
  #4  
TECH Junkie
iTrader: (2)
 
Joined: Mar 2005
Posts: 3,197
Likes: 0
From: Spring, TX
Lightbulb

Originally Posted by slownlow4.8
where can i buy a corvette servo, how much do they cost and what do i to install it?
Check a few sponsors to the right. Should be able to get the vette 2nd gear servo for $20-$30 and the 4th gear servo for $50-$80.
Stay away from the billet rod ones. Also consider a sonnax 4th gear super hold servo as well.
Check out FLT's web-site off to the side to purchase them.
http://www.finishlinetrans.com/
Heres a write up on the install:
http://www.gmfullsize.com/Tech%20Pag...ServoTech.html

Jim
Reply
Old Nov 5, 2006 | 11:41 PM
  #5  
xchevyx24's Avatar
TECH Enthusiast
 
Joined: Jul 2005
Posts: 597
Likes: 0
From: CORONA,CA
Default

FLT has them for $19 with seals
Reply
Old Nov 6, 2006 | 07:14 PM
  #6  
8MC's Avatar
8MC
TECH Apprentice
iTrader: (3)
 
Joined: Jun 2005
Posts: 356
Likes: 0
From: Santa Clarita, CA
Default

I got mine from Oregon Performance Transmission on Ebay. Cheap and fast. Do the install yourself if you can and save a few bucks, just take your time and pay attention to the outer snap ring.
Reply
Old Nov 6, 2006 | 09:33 PM
  #7  
slowec's Avatar
TECH Junkie
iTrader: (9)
 
Joined: Jun 2004
Posts: 3,062
Likes: 0
From: Brunswick, Ga
Default

where u is?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Wolftrk99
GM Drivetrain & Suspension
48
Dec 3, 2015 08:12 PM
wickedRCSB
GM Parts Classifieds
2
Oct 30, 2015 09:45 PM
SlvrSierra4.8
GM Parts Classifieds
7
Oct 1, 2015 09:39 PM
Tigger Welder
INTERNAL ENGINE MODIFICATIONS
14
Oct 1, 2015 08:41 AM
LARRY01Z28
GMT 800 & Older GM General Discussion
28
Sep 28, 2015 07:54 AM




All times are GMT -5. The time now is 12:41 PM.