Caltracs
Mar 26, 2005 | 12:28 AM
#51
Originally Posted by Flyer
OK ... here's the deal
The low profile bar set doesn't have the 2 different eyelets in the front. The front only hangs down 3 1/4 inch as oppose to 5 1/2. I think you would be OK with the regular ones though, but you might want the low pro's anyways.
I also got some good info from the guy on using them too. VERY helpful!
The low profile bar set doesn't have the 2 different eyelets in the front. The front only hangs down 3 1/4 inch as oppose to 5 1/2. I think you would be OK with the regular ones though, but you might want the low pro's anyways.
I also got some good info from the guy on using them too. VERY helpful!
Mar 26, 2005 | 12:40 AM
#52
TECH Resident
Joined: Sep 2004
Posts: 796
Likes: 11
From: Cali
Originally Posted by TurboBerserker
Anyone know if this will interfere with an STS kit?
Hey Flyer, pm sent
Hey Flyer, pm sent
No, i doubt there would be any issues. The bars go under the leaf springs, as everything on the STS is around and over the axle and springs.... I think that you might have some issues if you were to do a 4 link like the KP kit though.
Originally Posted by Scream
Has anyone ever installed these on a 4/6 truck? It looks like there wouldn't be much ground clearance w/ these installed. 
I know that Caltracs makes these bars setup for trucks with flip kits on them, so there is no doubt in my mind they wouldnt work out perfectly. I mean a flip kit=6" about 95% of the time, unless you have shacles to.
Flyer- sent you a PM
